You are here

Home

Nodes

Your search for "30" gave back 615 results.
Results for Forum Topic

Ubiquiti Nanostation Loco M5

published by HB9XCL on Mon, 09/18/2023 - 06:46
Forums: 
Nodes

Hi folks
I got one of this Nanostation Loco M5 XW for free, I know it's not one of the best devices one can have but it should be OK for me for doing field tests etc. - so I've downloaded and tfpt the Loco XW 3.23.8.0 firmware, the device starts but I don't get any LAN connection.

Searching the forum I found this forum post from 2018:

https://www.arednmesh.org/content/second-attempt-nanostation-loco-m5-no-...

Compatibility Inquiry: Will My Ubiquiti LiteBeam LBE-5AC-23 Work with AREDN Network?

published by Kb7sdm on Thu, 09/14/2023 - 11:02
Forums: 
Nodes

Greetings AREDN Community!

I'm new here and very interested in joining the AREDN network. I wanted to find out if it's possible to put into service my old pair of Ubiquiti LiteBeam (LBE-5AC-23). They have sadly been taking up space in my closet since I moved years ago, aching to get a new lease on life!

Ubiquity Rockets

published by kg7kmv on Mon, 10/23/2023 - 10:57
Forums: 
Nodes
I have 2 Rocket M5s and a Rocket M2. For some reason they occasionally "forget" their settings or firmware and become unusable, requiring me to re-flash the AREDN firmware. 
  • One M5 (XW) is on a remote site and I can't keep making half day trips to fix it. The one on-site is currently borked again. I can remotely access a Linux SBC on-site, so maybe there's a chance to fix it that way.
  • The other M5 and M2 are now on my workbench.

    Mesh or Mesh RF on a Mikrotik HAP ac Lite, difference and how to change ?

    published by HB9HHH on Sun, 10/22/2023 - 04:13
    Forums: 
    Nodes

    Beginner questions...

    I'm trying to set up a lab with 2 Mikrotik Hap ac Lite and 2 Powerbeam M5-300. All the devices are flashed with the AREDN firmware.

    After some tests, I now have in "Basic Setup" one of the Hap which indicates "Mesh" and "Band: 5GHz" and the other: "Mesh RF 2GHz", without the possibility of changing.

    I don't understand the difference between these 2 modes and how to switch from one mode to the other.

    Rocket M9

    published by WA3LAB on Thu, 10/26/2023 - 14:59
    Forums: 
    Nodes

    We have few 900 MHZ nodes in our network, and I decided to update the main sector antenna rocket with the latest daily build. I selected Rocket M XM from the software selector since it was not the other 2 selections.  It came up with the firmware updating window, and that's the last I have been able to get from it.  Now there is no response from the node. I tried all the items to get it working including loading the factory firmware via TFTP.  I can ping the node at 192.168.1.20, but the factory upload fails with no response.

    TP-Link CPE710 v1

    published by VE7KOD on Mon, 10/23/2023 - 23:07
    Forums: 
    Nodes

    Having a heck of a time flashing this thing. Confirmed on physical stamp and in the Pharos GUI that its v1. 

    When is use Tiny PXE server, it sends the file, reboots but goes back to Pharos? 
    I have tried two different PCs, one with physical LAN port and my laptop with two different USB > LAN adapters. With and without a switch in the mix. 

    NBE-5AC-16

    published by f4iyt on Sun, 10/22/2023 - 02:49
    Forums: 
    Nodes
    Hi alli need help
    i flash no problem other node i put a good BIN
    but for this node
    NBE-5AC-16D
    i check on AREDN
    i put more BIN but i's same result non good flash error2
    it's special BIN for this node ubiquiti NBE-5AC-16D
    Thank's for you help

    Xavier
    F4IYT
     

    CPE210(UN) V3.2

    published by vk4kws on Sat, 02/08/2020 - 01:45
    Forums: 
    Nodes
    Hi All. Very new here so hope this question hasn't already be asked.
    I have some TP LINK CPE210(UN) V3.2 and when I try to install the AREDN firmware I get a Not supported hardware error.
    I have tried the nightly builds as well as the stable ones "aredn-3.19.3.0-cpe210-v3-factory.bin"
    What am I missing.
    Kent
    PS I am trying the update from the factory UI

    Ubiquity Rocket M5 firmware flash TFTP:2 Firmware check fail

    published by KJ7RBS on Wed, 03/29/2023 - 20:24
    Forums: 
    Nodes

    Windows TFTP timeout
    TFTP2 timeout
    PumpKIN TFTP2: Firmware check failed

    These results were obtained when atempting to load
    AirOS 6.3.6 for XW and XM
    AREDN 3.22.12.0 for XW and XM
    AREDN aredn-3.22.12.0-ath79-generic-ubnt_rocket-m-squashfs-factory (AND XW variant)
    AREDN nightly aredn-2468-933e411-ath79-generic-ubnt_rocket-m-xw-squashfs-factory
    AREDN aredn-3.19.3.0-ubnt-rocket-m-xw-factory

    Here are the EXACT STEPS TO RESOLVE

    log into AirOS and factory reset

    My turn... Ubiquiti NanoStation loco M5 Install Problems

    published by kn6pe on Wed, 11/15/2023 - 15:20
    Forums: 
    Nodes

    Hello mesh folks,
    A few of us in the SF south bay area are attempting to get 5G nodes up and running for some local emcomm work.  However, we are all stuck at the same point.  Here are the details:

    1. PC = Windows 11
    2. Device = NanoStation loco M5
        a. Wireless Type = 802.11n
        b. Date Code = 2328k
        c. Ubiquiti FW = XW.v6.2.0
        d. RAM = 32MB SDRAM, 8MB Flash
    3. Set the PC
        a. IP=192.168.1.10
        b. Mask=255.255.255.0
        c. WIFI=OFF.

    Pages

    Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer