You are here

Home

Possible Bugs

Your search for "22" gave back 150 results.
Results for Forum Topic

Bad Gateway error when uploading Nightly Build on nanostation M5 XM

published by KN6KQR on Sun, 02/20/2022 - 17:08
Forums: 
Possible Bugs

Been trying to update the firmware on a Nano M5 and keep getting the Bad Gateway error. Running the M5 on a hap ac lite, which updated fine. Any tips?

Authentication Error - Mikrotik hAP ac lite - New Firmware Flash

published by AG6ST on Wed, 05/29/2019 - 18:59
Forums: 
Possible Bugs

Userid and password does not let me log into Setup after a reflash.  I just bought a new Mikrotik hAP ac lite.  Reflashed it with the  newest build .elf file and the .bin file, it opens just fine to the NoCall... page.  I log in to setup just fine with the root and hsmm id and password.  I update channel to -2 and width to 10MHz, distance, my log id to my call AG6ST and a simple password. Hit reboot.  It all looks fine, when I open the 
http://localnode.local.mesh:8080

Tunnel Failure AREDN 998 03-10-2022

published by w8erw on Thu, 03/10/2022 - 08:12
Forums: 
Possible Bugs

After loading the latest nightly release 998, Tunnel connections are no longer active.

I have done this several times previously without a hitch.  This time, the tunnel connections do not light up and Mesh status indicates no active tunnels.
I have reverted to 3.22.1.0.

Thanks,

Jim
W8ERW
 

DtD issue on hAP?

published by KM6SLF on Wed, 03/23/2022 - 16:29
Forums: 
Possible Bugs
My hAP is putting out power on its port 5, but apparently not making a DtD connection. Any idea what could cause this? 

This CPE510 
http://km6slf-cpe510-220.local.mesh/
should have a direct neighbor DtD connection to the hAP that powers it.
http://km6slf-hap-148.local.mesh:8080/

I also tested it with a Nanostation, so I think the problem is with the hAP. Any ideas? It seems to be working fine in every other way. Support data attached.

GL.Inet AR-150

published by kc0ode on Thu, 02/06/2020 - 19:13
Forums: 
Possible Bugs

Last night I upgraded my AR-150 to firmware 1307 from, I believe, firmware 1234. Now for the life of me, I can not get it to pull a WAN IP. I can connect to it just fine from the LAN side, but not when connected my main router that supplies the WAN IP. It worked until I did the upgrade. I would revert it back to the previous (working firmware), but can't find the copy that I originally downloaded. Thoughts/suggestions? A link to previous firmware?

Where to report issues with nightly builds

published by WA3LAB on Fri, 05/27/2022 - 21:05
Forums: 
Possible Bugs
   I recently installed the nightly build version 1287-b680d20 because I was very interested in the LQM feature.  I have noted some anomalies with this version and would like to know where I should report these issues?  Do I do it here in the forum, or through GitHub?  
Thanks,
Glenn WA3LAB

DHCP reservations not being honored

published by K6CCC on Mon, 06/20/2022 - 13:55
Forums: 
Possible Bugs
This has been a somewhat re-occuring issue for quite some while, but I may have noticed something consistent.

Multipile GL-iNET GL-AR300M MAC problem

published by KQ6EO on Tue, 06/14/2022 - 17:00
Forums: 
Possible Bugs
I was trying to move my Server tunnel and Client tunnel to separate GL-AR300M routers and they would loose connection to the switch.  Turns out that both devices have the same MAC address on the br-lan and eth1 lan adapter.

LAN Access Point not working on 3.22.6 and 3.22.8

published by n5hzr on Sun, 08/28/2022 - 17:50
Forums: 
Possible Bugs
I've been running a GLi-AR150 for a year or so with a LAN Access Point on channel 6, running WPA2-PSK. It had worked just fine.

After updating to 3.22.6.0 software I'm no longer able to see the LAN Wi-Fi on my laptop sitting next to the router. I changed all of the parameters and rebooted, but it still doesn't show up. Updating to 3.22.8.0 software hasn't helped the condition. 

Any thoughts? Anything that I can do to help you test/fix this?

Pages

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer