Possible Bugs

node: NOCALL-4-5-6
model: Ubiquiti Rocket M XW

!!!! UNSUPPORTED DEVICE !!!!
boardid: 0xffff
Device has not been tested. Please file a ticket with your experiences.

br-lan 00:02:03:05:05:06
eth0   00:02:03:05:05:06
eth0.1 00:02:03:05:05:06
eth0.2 00:02:03:05:05:06
tunl0  00-00-00-00-00-00-00-44-00-00-00-00-00-00-00-00
wlan0  00:02:03:04:05:06

/proc/cpuinfo
system type		: Atheros AR9344 rev 2
machine			: Ubiquiti Rocket M XW
processor		: 0
cpu model		: MIPS 74Kc V4.12
BogoMIPS		: 278.93
wait instruction	: yes
microsecond timers	: yes
tlb_entries		: 32
extra interrupt vector	: yes

NanoBridge updated well using GUI in admin tab.  2 different Rockets seemed normal through TFT file transfer. Multiple reset attempts with factory version behaved the same.  There seems to be no RF out.  ipconfig returns ip address   169.254.182.10.  address used in edge browser returns "refused to connect".
Anyone else experiencing Rockets bricked but NanoBridges update fine?

Upgraded my 13 nodes from Nightly 599 to Nightly 607 this morning and had an issue with my Rocket XM nodes.  Here is the Nightly 607 files I downloaded, and the error message that I got trying to use the Rocket XM file:


In case your browser does not embed the graphic, it can be see directly at:  http://k6ccc.org/aredn/ath79_filename_issue.png

FYI - Out of 13 nodes updated from 648 to 654, every single one lost lat / long information. I had to manually re-enter it after the update to 654 and was able to save it on the first attempt.
This included Rocket M3 XM, Rocket M5 XM, Rocket M5 XW, GLiNet AR750 and USB150, Mikrotik hAP and both 2GHz and 5GHz LHGs.
Has been reported on GitHub as well.
 

The Toro Mesh Status.jpg shows
KE6BXT-Toro-M5R-INDIO 
and 
KE6BXT-M5R-Tem-11
listed twice.  Once for Current and once for Previous Neighbors.  The 3 nodes (including KE6BXT-Toro-M5RXW-128) have never shared the same channel and therefore never should have been in the previous neighbors.  Each node is running a different channel and are connected dtd.  All 3 nodes are running VERY slow to no connection.  I was able (over an hour to download) to download the support data for KE6BXT-Toro-M5RXW-128.
KE6BXT-Toro-M5RXW-128 is running firmware 634-837a3c6

I followed the directions for creating a local package server found at https://arednmesh.readthedocs.io/en/latest/arednHow-toGuides/local-package-repo.htm  My copy is a mirror of the downloads.arednmesh.org server.  This way, the only thing I had to change was the IP address for my web server (which is sitting on the mesh network).  The hardware I am using is a raspberry pi (an older model but it still serves web content just fine).