You are here

Home

Nodes

Your search for "30" gave back 615 results.
Results for Forum Topic

NanoStation M5 cannot install

published by k0tan on Sat, 12/22/2018 - 19:55
Forums: 
Nodes

I am trying again on my NanoStation M5. I have it in TFTP mode, have tried 192.168.1.5 and 192.168.1.20. Angry IP shows my computer as 192.168.1.5 or 20, and the node on 192.168.1.1.

C:\Users\ckotan\Downloads>tftp -i 192.168.1.1 PUT aredn-579-27f4356-ubnt-rocket-m-xw-factory.bin
 Connect request failed

I've tried fully qualified path name, of course. This is using the windows tftp command. I turned off the bit defender firewall - no joy.

Bullet wifi vs Bullet mesh failure

published by w8erd on Mon, 08/31/2020 - 10:23
Forums: 
Nodes
See attachment diagram.

Bob W8ERD

network trace

published by w8erd on Tue, 08/25/2020 - 16:58
Forums: 
Nodes

I am having difficulty with Grandstream Wave on a Bullet.  GS support has asked me the question below. Please help me understand what I need to do to get the network trace they request.  Thanks!


"To understand what happens in the background that might be causing this issue, I will need network traces from Ubiquiti that capture the reported issue.

Start the capture and make a test call that replicates the described issue from both sides. When done, stop the trace, download it and attach it to the ticket."

Bob W8ERD

Rocket Fails 3.20.3.1 - Kills LAN Port!

published by N3EV on Mon, 09/07/2020 - 11:06
Forums: 
Nodes
AREDN FW & HW Gurus Needed! I have encountered a really odd AREDN FW issue with a pair of Rocket M5 XM nodes. IF I flash with _anything_ later than AREDN 3.19.3.0, then the LAN port quits! Has anybody else encountered this type of problem? Or is there a fix? I have carefully dug through the AREDN Forum etc and have found nothing yet... Specifics and Background: - FYI - I have a deployable cache of two about dozen various UBNT & MikroTik nodes, including several more Rockets (M2 XM), and lots of success (hard earned, as usual!) in upgrading and flashing FW, since 3.16 days.

Not Access Points

published by w8erd on Tue, 09/22/2020 - 13:47
Forums: 
Nodes
Native Bullets , Nanostations and Rockets are NOT access points.  It has taken me some time to realize this.  See the note below from Ubiquiti.
Is the same true for the same AREDN versions?

Rick P. (Ubiquiti Help Center) 

Sep 11, 2020, 8:30 UTC 

CPE510 (EU-Version)

published by DL6MCO on Thu, 09/17/2020 - 11:04
Forums: 
Nodes

Hi, is a firmware for a european CPE510 (V3.20) available? I get a message "Hardware not supportet"

73 Rolf
DL6MCO

How to get the factory firmware on Mikrotic Router

published by OE5WSE on Mon, 03/23/2020 - 17:33
Forums: 
Nodes
I need to reset the mikrotic hap lite to the orginal firmware. at the moment there ist the aredn firmware installed, but i need the router as an normal wlan router.
How can i flash it with windows and which firmware i need.

Software or should I return my hardware?

published by K6NOV on Fri, 10/02/2020 - 23:19
Forums: 
Nodes
Hi, I'm new to AREDN and trying to set up my first node.
I have a TP-Link CPE510 v3.28
I've loaded AREDN version 3.20.3.1 on node.

My problem is I can't connect or see nodes in the ham only channels. (or I therorize this anyway).
If i set the bandwidth to 20MHz, I see a ton of SSIDs all over the area.

New SXTsq 5 flash issues

published by NH6HI on Fri, 08/14/2020 - 17:25
Forums: 
Nodes
Aloha,
Just picked up a pair of SXTsq 5 to play with and am not able to do the final flash. I get the
BAD GATEWAY
THE PROCESS DID NOT PRODUCE ANY RESPONSE screen like on the other earlier threads.

I've tried both the current stable and the current nightly build (3.20.3.1  /  1710-437)
Device info:
ID # RBSXTsq5HPnD
serial number ends with  /025/r2
INTL EU version

Any insight appreciated

Support file attached

Jim NH6HI

NanoBridge in trouble

published by Jerry W0HU on Wed, 10/07/2020 - 19:21
Forums: 
Nodes

My aging NanoBridgeM2 needed an upgrade from 3.16.1.1 to 3.20.3.1.  I tried to use the Setup/Administration gui, but it seems to have put the unit on a trip to outer space or somewhere.  I have upgraded eight other units this week with no problems.  This one seems to be in trouble of some kind, and it is 30 feet up a tower I am forbidden to climb.

Pages

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer