You are here

Home

Nodes

Your search for "30" gave back 615 results.
Results for Forum Topic

Mikrotik SXT 5 High Power now in nightly build

published by AE6XE on Sat, 08/31/2019 - 01:04
Forums: 
Nodes

The Mikrotik SXTsq 5HPnD is now in the nightly build (overnight).  Also called "SXTsq 5 Higher Power".  This handy little device reuses the LHG 5HPnD motherboard with a ~4" square panel antenna.   Careful to not confuse with some of the older SXT 5 lite devices which are circular flat panel packaging (and not currently defined in the AREDN firmware).  

* 28dBm max power
* 64MB RAM
* 16MB NOR Flash
* suggest pricing $49
* 16dBi gain panel 

Joe AE6XE

 

Capturing System Voltage

published by Kf7vol on Sun, 04/26/2020 - 12:35
Forums: 
Nodes
Good Morning Group,

I have deployed a node at a remote site and am looking to see what my options are for capturing voltage. At this time I only have one radio on location. It is on 2 batteries with no way to generate power at this time. Is there something in a ubiquity nano that will allow you to look at system voltage in the command line? I know secondary systems like a Pi or Arduino can do it as well but I am trying to limit my power consumption with extra devices.

Thanks in advance!

73,
kf7vol

Ubiquity Rocket M2

published by kf7ebx on Mon, 03/09/2020 - 18:22
Forums: 
Nodes

I have a Rocket M2, brand new that was donated to me. I am trying to flash it to Aredn using my Mac Terminal on TFTP. When I send the file I get the following back:

Error Code 514: Firmware check failed.

When I log into the ubiquity firmware it confirms it is a M2 XM, which is the firmware I downloaded. This leaves me questioning if I need to downgrade it before I can TFTP the aredn factory file to it? 

Status settings in AIR OS are:
version: 5.6.11 (XM)
Device Model: Rocket M2
Any thoughts would be helpful. 

NonaStation M5 Firmware

published by k6dlc on Fri, 05/15/2020 - 22:40
Forums: 
Nodes
   I am having issues on saving after trying to change my password

Configuration NOT saved!
  • invalid Mesh RF channel
  • Invalid country
  • invalid LAN netmask
  • invalid WAN DNS 1
  • invalid ntp server firmware version
    configuration system time uptime
    load average free space
    3.20.3.0
    not set
    Thu Feb 27 2020
    21:10:44 UTC
    4 min
    0.02, 0.10, 0.05

Rocket self-contradictory

published by w8erd on Fri, 05/22/2020 - 09:28
Forums: 
Nodes
I have a rocket M2 XM on my tower.  When I went to update the firmware, a line appeared that said:
hardware type ubnt (nanostation-m
This is clearly wrong, and the free memory of 46284KB confirms it is not a nanostation.
It would not accept a rocket update.
It did accept a nanostation update to 3.20.3.0, and it seems to work.

I tried other updates, including another to 3.20.3.0
They all fail and say: 
Firmware cannot be updated
Upload file is not recognized
Failed to restart all services
Please reboot this node

Is it 'RBLHG-2nD-XL' or 'RBLHG-2HPnD-XL'?

published by K9CQB on Wed, 02/13/2019 - 22:32
Forums: 
Nodes

I really wanted to find the best 2.4GHz high-gain point-to-point dish to close some links at some sites that already have 5GHz equipment on them. But I still want to spread the love of a 2.4GHz AREDN node in the general direction of that community that we are shooting over, making it easy for them to get on the mesh network. So one of the options on the supported list was the RBLHG-2HPnD-XL. I scrubbed the internet for them, but could find them. So I thought it was a typo and bought the RBLHG-2nD-XL. And then I found out the real deal:

MikroTik hAP change VLAN

published by iz5fsa on Mon, 05/25/2020 - 08:39
Forums: 
Nodes
Is there a way to set another eth port as D2D?
Change it from VLAN1 to VLAN2, I suppose...
--
73 de Leo IZ5FSA
 

MikroTik hAP PoE port not powering node

published by KE6GYD on Wed, 05/27/2020 - 17:32
Forums: 
Nodes
I've converted it to ARDEN and the UI shows up fine either on WiFi or wired.  For some reason, I can't get the PoE port 5 to power up an external node.  I kept the external node connected to the hAP then applied power to the hAP. During the hAP's boot up, I see the external node lights turn on to boot, then go off.  At that same time, I see a Red LED on the hAP.  When the red LED goes off, then the node lights all go out.

GL.Inet AR-150 5 ghz version?

published by k6dlc on Sat, 05/30/2020 - 15:20
Forums: 
Nodes
   I would like to know if there is a 5GHZ version of the AR-150?

 

TPLINK CPE610 - BOOT LOOP

published by VK1MIC on Thu, 04/09/2020 - 00:04
Forums: 
Nodes

Hi all,

My CPE610 just got delivered this morning, i downloaded the factory file to flash to the node, the web interface of the tp link rejected it, so did it via the PXE server route, now the node looks like it is just in a reboot loop after taking the renamed "recovery.bin' file.

Ideas?

Wade
VK1MIC

Pages

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer