Nodes

I am a newbie at this I was given an Air Grid M2 HP form UBiquiti  and I would like to get the arden software on it but I do not see that it is supported.  Does anyone know what build I have to use?

Hi, everyone,

I have a strange question. We have two nodes. Node 1 is a Rocket with a 120-degree sector antenna mounted at 263' AGL and Node 2 is a Ubiquiti dish mounted at around 40' AGL. Up until this past week, they've had LQ/NLQ in the high 80's to 100. Now, the qualities are all over the board, but the SNR chart shows around an 18 SNR. Everything is mounted securely, so there hasn't been any movement. Both are running on 5.8 GHz with about an 11-mile distance between them.

I'm looking for any suggestions on where to start looking.

I'm managing 4ea Bullet M2 nodes on roofs and towers, so physical access is difficult.
In the past, the type of M2 hardware didn't seem to matter (or i've been lucky), so i don't have records for serial/model numbers.
It seems that the newest version of the firmware has 3 different versions, depending on what type of bullet it is being installed on.

The firmware chart shows:
Bullet M2 Titanium      needs   aredn-3.20.3.0-ar71xx-ubnt-bullet-m-sysupgrade.bin
Bullet M2 (XM)            needs   aredn-3.20.3.0-ath79-ubnt_bullet-m-sysupgrade.bin

  Now that there is a new version OS that I had heard takes up less space. Is this still a problem with the hardware that is listed as   "AREDN Stable, but, NOT recommended for new deployments.  (Low memory or non-MIMO device" in https://www.arednmesh.org/content/supported-platform-matrix ?

I have 3 different models of nodes (Mikrotik, TP-Link, and GLi) and was planning to add them all to the same LAN.
Once I installed and configured the AREDN firmware to them, they are all assigned different LAN network segments.
I can force them to play together as Dtd partners, but I was hoping to assign static IPs to them on the same LAN segment.
Is there a reasonably simple way to do this? I have not been able to ssh into any of them, so shell commands have not
been a path forward.

Seems all I can find online are the specs for the new AC versions but not the older AREDN compatible ones.

I'm trying to determine if they're AT or AF compatible as I need to change my POE Extender strategy at one of my sites.
 

Hi Everybody :-) Dear Om's

Well, I'm working but it's going slowly...

Hi there,

anyone uses the 2nd LAN port on a TP-Link CPE210 or CPE510 for d2d connection? is this working, are there known issues or other topics I should know, i.e. regarding POE supply over the 2nd port?

Thanks,
BR Kurt HB9XCL