You are here

Nodes

Your search for "30" gave back 616 results.
Results for Forum Topic

AR300 Problem

Forums: 
The AR300 is advertised to support POE.  I have applied 5V POE to both of the ethernet ports
and nothing lights up.  Is the ad wrong?

Bob W8ERD

LHG-2XL problems

Forums: 
The reset button does not do anything.
The advertised POE capability does not work.

Any hope for fixing these problems?

Thanks!

Bob W8ERD

Bullet vs DHCP

Forums: 
I have a bullet with dhcp turned on. I want to turn it off.
If I uncheck "dchp server" and then "save changes", the screen goes to a message saying "This site can't be reached".
If I click return, it goes back to where it was before I unclicked "dhcp server", and "dhcp server is still checked.

How do I turn off dhcp?

Bob W8ERD

LiteBeam M5 - inovato Quadra - Android Phone

Forums: 
I can access my LiteBeam M5 using an inovato Quadra (running Armbian) via the Firefox browser.
The M5 connects via a five port tp-link switch to the Quadra LAN port.
If the wifi/bluetooth USB nic is installed - the connection to the M5 is broken.
I have NOMACHINE on my Android phone and the Quadra - so the phone acts as monitor, mouse, and keyboard.
Is there any way to overcome the broken connection to the M5 when the Wifi/BT USB nic is installed?
Sure would be nice to not have to carry around a 10" monitor and a keyboard/trackpad.
Thanks

Revert MikroTik hAP back to RouterOS

Forums: 
Hey,

I wonder if it is possible to revert a MikroTik hAP AC back to RouterOS operation system?
I've the latest RouterOS firmware but not sure how to do that and if it's actually an option.

Thanks

Connecting remote phone to pix

Forums: 
Is it possible to add a remote phone to a PBX if it is connected via mesh and has its own dhcp node?

Bob W8ERD

GL-AR300M16_ext. Unable to communicate over mesh to connected Lan devices.

Forums: 

 Hi all. 
Sorry if I'm posting in wrong section. I am having an issue with connecting to voip phone connected to the gl.inet device over mesh. I have tested a different    phone with same results. The phone will not register with freepbx on the network either. I am not an expert with Wireshark but when I try to log into phones      web gui it never responds. I never see any packets respond.

Bad Gateway Error-NanoBridge 5G25 on 3.22.8.0

Forums: 
Have two NanoBridge 5G25 (32Mb RAM) dishes at a permanent non-critical site on different channels dtd'd to each other pointing to two different hilltops.  They were updated to 3.22.8.0 when it came out and have been working just fine up until a few weeks ago.

Now when accessed via the MESH, would get in Firefox web browser (Also same result in Chrome),  Redirecting then a Bad Gateway error message on both.  Even accessing via the switch at the site caused same.  Downgraded one to 3.22.6.0 and it seemed to work better for a bit.  Then same.

Unexpected config on Mikrotik SXTsq Lite2

Forums: 


I expected to find the AREDN software I had loaded last year on this SXTsq Lite2, but found what appears to be Mikrotik router ver 6.45.9 (long term). Screen capture attached. I'm wondering how should I go about loading the current AREDN sw? Thanks.

 

New Install Didn't Calculate It's Mesh IP Address

Forums: 

I had a bit of trouble installing AREDN on a new Rocket M5 because the reset button was flaky. There is no tactile feedback, and I was just missing the button with my magic paperclip. Eventually it came up with the 1-3, 2-4 dancing LEDs on 192.168.1.20 and I was able to upload the AREDN image. I did not need to set up a DHCP server.

Pages

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer