You are here

Home

Hardware

Your search for "28" gave back 1043 results.
Results for Forum Topic

Rocket M2 XM does not support M2 XM firmware version

published by N5SKT on Mon, 03/01/2021 - 14:35
Forums: 
Hardware

I have 3 Rockets built in 2010. They have a USB device on the bottom along with the LAN/POE and reset. What I have found is that it uses the ar71 and not the ar79 inside and so I ended up using the Bullet M2 firmware. I was wondering if anyone familiar with the firmware has a suggestion on a better firmware to use. The firmware loaded does appear to be working and I have connected them together and the one outdoors is connecting to a number of other nodes in the area. I would be interested in hearing any suggestions people might have. 

TFTP connect request failed

published by N8CAV on Mon, 11/16/2020 - 11:44
Forums: 
Nodes

I tried to find a topic on this issue but failed so I need to ask.
  I'm trying to load AREDN software into a M5 rocket XW. I write tftp -i 192.168.1.20 put downloads\aredn-3.20.3.1-ar71xx-ubnt-rocket-m-xw-factory.bin into the command prompt and it seems to take but comes back "Connect Request Failed"
The node is flashing red/yellow and appears in the tftp mode.
Network setting is 192.168.1.50
                              255.255.255.0
Help!


 

hAP AC Lite Bricked

published by w8erw on Sat, 03/27/2021 - 13:59
Forums: 
Nodes
Has anyone been successful in unbricking a hAP AC Lite?
I surely have one thatg refuses to talk to me now.
 
Thanks,
 
Jim
W8ERW

Restore Ubiquity Firmware on NanoStation M5 ???

published by AL7MH on Thu, 03/01/2018 - 10:11
Forums: 
Nodes
I successfully installed AREDN firmware on a NanoStation M5.  Works great.  

I'd like to reverse the process to use the NanoStation on a wifi project.  Can I somehow reinstall the Ubiquity firmware (only to reverse the process later to reinstall the AREDN)????

Gl.inet AR750 Creta center n/w plug without DHCP?

published by DO5MSH on Wed, 04/07/2021 - 11:23
Forums: 
Nodes
Hi,
I noticed with my new AR750 Creta that the RJ45 in the middle provides no DHCP and no normal network operation.
Is that connector reserved for DtD? Or something defect or I made a failure?

95 SNR?

published by WA3LAB on Thu, 04/01/2021 - 15:14
Forums: 
Nodes
We have seen this on several nodes, and know it is not a real signal, but I wonder if it could an effect on the AGC, or other  software tweaks that the node will do?  Typically I have seen this on Nanostations M2 or M5, where the node is receiving a signal hovering right around the noise floor.  This is not presenting any problems, but I just wanted to mention it in case it could affect the node operation.
73,
Glenn WA3LAB

GL AR750 in Nightly Builds

published by AE6XE on Sun, 05/26/2019 - 19:35
Forums: 
Nodes
The GL.iNet AR750 will be in the nightly built images from May 27, 2019.   Thanks to Don KE6BXT for providing the device.  This GL model boasts:

1) dual wireless - 2GHz (802.11n) and 5GHz (802.11ac) same as the hAP ac lite
2) 3 ports are configured:
    - WAN (untagged)
    - LAN (untagged)
    - DtDLink (vlan 2)
3) 128Mb of RAM
4) 16Mb of NOR flash
5) max 23dBm on 2GHz for mesh RF traffic
6) 5v mini-usb power port (thus no POE passthough options)
7) usb port (not configured in AREDN out-of-box)

hAP ac lite firmware

published by K4JZP on Sun, 04/04/2021 - 12:20
Forums: 
Hardware

I have followed the instruction to install the factory firmware on the hAP ac lite router.
Everything goes as expected until I press/hold the reset button and power on the router.
The "TFTPd: DoReadFile: rb.elf" never appears in the pxesrv window.
The only network connection on my Windows 10 machine are to a dumb switch, and the router.
Set a static IP on my PC.
This IP appears in the pxesrv list.
After I put pxesrv ONLINE I wait until "no other DHCPd detected on your LAN".

Noob

published by VE7KOD on Mon, 04/12/2021 - 03:50
Forums: 
Nodes
Just starting out and want get good equipment that will be future proof. I am looking at some AC equipment but I know they're not supported at the moment, hopefully around Christmas time I've read.
Would it be worth the wait if I have a good deal on an AirMax Litebeam AC gen2 or TPlink CPE710? Or should I just say screw it and get something that will work now?

I've touched base with the local group and they suggested I post here :)


Thanks

Jesse
VE7KOD

Is the PBE-M5-400-US supported?

published by WB0GXD on Sat, 04/10/2021 - 14:14
Forums: 
Nodes

We are just getting started into the world of mesh networking.  My question is - The airMAX PowerBeam 5 GHz, PBE-M5-400-xx is listed on the supported list, but with an ISO suffix rather than the -US suffix. Is it still supported by the AREDN firmware? Thanks!

Pages

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer