You are here

Home

Hardware

Your search for "28" gave back 1043 results.
Results for Forum Topic

TP-Link CPE610 v1.0 No WAN

published by km6zpo on Mon, 01/04/2021 - 17:18
Forums: 
Nodes

My TP-Link CPE610 refuses to capture an IP address from my internal router.  I wanted to share my home Internet connection via this device over the RF mesh.  I feel as though I'm missing something fundamental here.  I've tried setting the WAN to DHCP and also tried assigning an IP to it. 

Help!

Mark, KM6ZPO


Two Nanostations and common switch

published by K1DOS on Tue, 01/05/2021 - 21:44
Forums: 
Hardware
Can two Nanostations (one 2 and one 5 gig) have their network connections on the same switch?  I'm confused about the DTD feature in other devices.

Right now I have two Nanostations on a tower and was planing to plug them into one switch at the base of the tower.  Is this okay?

Thanks in advance.

Respectfully,

Hank

Rocket M5 with FW XW.v6.2.0 unable to downgrade

published by i8fuc on Thu, 01/07/2021 - 15:42
Forums: 
Nodes
Hi all,
sorry if this is the wrong place to ask this type of question... just in case please help me finding the correct place...

I got two Ubiquiti Rocket M5 radios manufacturing date 10/10/20   equipped with FW XW.v6.2.0

Tryed to downgrade to install our FW but no success at all....   either via WEB GUI and via TFTP

The best downgrade I was able to perform successfully wa to 6.1.11   

Trouble with first flash to Nanostation M5 XW

published by kk6epz on Sun, 01/03/2021 - 02:37
Forums: 
Nodes

I'm having trouble getting AREDN on a brand new Nanostation M5 XW. I can connect to it on 192.168.1.20 and see the following:
Device Model: NanoStation M5
Version: v6.2.0 (XW)
Date: 2019-07-03 11:20:27

When I power it on while holding the reset button, I see the 1-3, 2-4 flashing pattern of the LEDs after about 30 seconds. But when I try to put the file using tftp, I get a "Transfer timed out".

 

What controls what types of hardware can be supported?

published by AB1PH on Sat, 01/09/2021 - 18:37
Forums: 
Nodes

What controls what kind of hardware can be supported?

Are there characteristics of the hardware that makes it more or less easy to port the software?

Thanks!

Puzzlement with an Ubiquiti Bullet M2 XM and Bullet M2 XW

published by AB1PH on Fri, 01/08/2021 - 17:48
Forums: 
Nodes

I have a:

- bullet M2 XM

and

- bullet M2 XW

They are both running AREDN 3.20.3.1

The bullet M2 XM will go to a power level of 28 dB.

The bullet M2 XW will only fo to a power level of 25 dB.

Both devices have the red LED number 3 lit.

The bullet M2 XW has the LED number 6 lit.

The bullet M2 XM does not have LED 6 lit (it works during boot  up but is not lit during operation)

They both seem to be running fine, but I am puzzled that they are different.

Ubiquiti nodes from 2014 : migration from HSMM to AREDN

published by AB1PH on Thu, 12/31/2020 - 18:15
Forums: 
Nodes

I have two ubiquiti bullet M2 HP nodes from 2014.

They are running HSMM 3.1.

Can I just upload the firmware version:

- File: aredn-3.20.3.1-ar71xx-ubnt-bullet-m-sysupgrade.bin

or do I need to do the factory default firmware upgrade?

Thanks!

Remoting resetting ubiquiti bullet M2 XM and XW models

published by AB1PH on Sat, 01/09/2021 - 11:01
Forums: 
Nodes


I do not find this well documented, and so am documenting the remote reset method for Ubiquiti bullet M2 models XM and XW.

So I will record my findings here and my testing suggests the procedures are different.

We will focus on remote resetting the bullet m2 devices rather than the local reset.

For the bullet M2 XM

- unplug the power over ethernet cable to the bullet m2 XM

- push the remote reset button on the power supply

- plug in the power over ethernet cable

looking for LHG2 devices to test images

published by AE6XE on Sat, 06/22/2019 - 02:33
Forums: 
Nodes
I am looking for early testing of images for LHG-2nD and LHG-2nD-XL devices.  The LDF2-2nD has an LHG-2nD motherboard, so your LHG should be identical.  I have the LDF2-2nD and have success in testing these images.   I suspect all 3 devices are the same motherboard.    The images are available here (must use this .elf, and not one from a nightly build):

https://drive.google.com/drive/folders/1TcZi28LoSyhogow0ACgO7QRrasytJD0x...

LHG Dish cannot load firmware

published by wa0vus on Sat, 01/09/2021 - 12:40
Forums: 
Nodes
I and another ham each have a pair of dish nodes.  LHG XL 2.it says on the label.  We have been unable to get a firmware to load except once.  
We use PXE server and that has worked for other Microtic hAP we have.up and meshing.

1.Setup laptop with static 192.168.88.20 and turn off wireless. runs thru switch.
2.start PXE and it sees the ip .of 20.
3. Set rb.elf file to load on PXE
4. Press dish reset and powerup.
5. wait 10 minutes.
6. Set laptop for dhcp.
Unable to find the dish on 192.168.1.1 or 192.168.88.1.

Pages

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer