You are here

Home

Hardware

Your search for "28" gave back 1043 results.
Results for Forum Topic

2.4 GHz directional RX/TX 17 km

published by KZ0FOX on Tue, 01/07/2020 - 23:13
Forums: 
Antennas

I plan to setup a Rocket M2 at 33.265978,-96.7601066.  The closest node is KF5NNY-LittleElm-North at ​17 km away and may be up on a water tower.  I can get about 25 feet high at my location in North Texas.  Is it reasonable to expect a Ubiquiti PowerBeam (PBE-M2-400) or airMAX RD-2G24 to work?  I would like to gauge my probability of success before I invest the time.  I prefer to use a cheaper Yagi antenna if I can source one with gain/noise specs for this application.

Thanks for your suggestions.

hAP AC Lite No Load

published by w8erw on Fri, 01/03/2020 - 20:28
Forums: 
Nodes
Is anyone having an issue with a new Mikrotik hAP AC Lite?  I received two new units recently.  The first one was a piece of cake.  The AREDN firmware loaded and configured nicely.  The second unit, not so pretty good.  I can get through the initial load with PXE.  When I bring it up again to configure and save, it comes back with the factory firmware.  Any thoughts?  I've tried all the tricks I know of.  Again the first one went fine.  Same procedure with the second and it will not retain the AREDN firmware.  I am using the current release of firmware, no nightly builds.  This thing is being

Netgear GS105 not passing WAN

published by VK1MIC on Sun, 11/01/2020 - 08:33
Forums: 
Network Switches
I have a GS105 that isnt passing WAN - pics of my vlans for scrutiny


 

POE Not Working on Mikrotik HAP AC

published by KD0VWH on Wed, 01/20/2021 - 18:07
Forums: 
Nodes

I am running a Mikrotik HAP AC to a TP-LINK CPE210 running firmware 38-3faf42c on the Mikrotik and firmware 3.20.3.1 on the CPE210.  When I initially configured my setup at my kitchen table using 2 ft cat6 cables everything worked great.  I was able to communicate to the Mikrotik and it saw the node as a neighbor through port 5 on the Mikrotik (yes, I have POE passthrough turned on).

bricked m5 nanostation

published by N8CAV on Sun, 01/03/2021 - 15:37
Forums: 
Nodes
I have a 5g nano xm that had been working with the 3.19.x.x software. When I tried updating to 3.20.3.1 using UI the lights on the node all flashed and then only the green power light on the left side remained on. I tried to tftp it and it does not respond at all. I cannot make it do anything.
 

PBE-M5-400 not responding.

published by kp4osp on Mon, 01/25/2021 - 21:08
Forums: 
Nodes
Hello,

Flashing a Ubiquiti G3 Flex

published by G0GCQ on Wed, 01/27/2021 - 10:45
Forums: 
Cameras

Hi Folks
I am considering purchasing an Ubiquiti G3 Flex camera for the outside of my house: security & weather related. It will be 3m away from the main AREDN router on my property.
Is it safe to assume that I will need to flash the camera with AREDN firmware? Is it the standard Ubiquiti firmware? Or, as it is using the Cat7 cable, does the firmware stay "as is" on arrival?
My router is a Mikrotik ac Lite.
Thanks.
Best 73 de John G0GCQ

NanoStation M5 no IP after Flash (solved)

published by DD4SG on Sat, 01/23/2021 - 17:29
Forums: 
Nodes

Hi Folks,

I startet with Aredn once again. (last Year I  configured some Loco M5 Stations. 

Now I have 3 Loco M5 running with an Grandstream Telefon and its is working fine. 

I have recently purchachsed an NanoStation M5 to get an 4th Node running. Unfortunatelty the Flashing did not work.

I  checked first the Firmware on den Os and it says XM.v6.2.0 So I decided to take the 3.20.3.1...-m-factory.bin. I used the Main Lan connection to flash the device. 

LiteBeamM5 LBE-M5-23-US will not flash Aredn Firmware

published by AA3JC on Sat, 01/30/2021 - 13:58
Forums: 
Nodes
Just received 3 LiteBeamM5 Model: LBE-M5-23-US that will not flash Aredn Firmware.  All three give me the same error trying to update the firmware to Factory  aredn-3.20.3.1-ar71xx-ubnt-lbe-m5-factory.bin  "Wrong Firmware version is uploaded. Please upload the correct version and try again".  I also tried the Sysupgrade version, and also the Nightly version,  aredn-84-99305c5-ar71xx-ubnt-lbe-m5-sysupgrade.bin also with the same error on all three.  

LHG LX 5HP Trouble with factory file

published by DL6MCO on Fri, 01/29/2021 - 14:44
Forums: 
Nodes

Hi specialists,
I'm not able to flash an LHG LX 5HP with the rb.elf file.
As soon as the download starts, I get following output:

rolf@rolf-Inspiron-7720:~$ sudo dnsmasq -i enp3s0 --dhcp-range=192.168.1.100,192.168.1.200 --dhcp-boot=rb.elf --enable-tftp --tftp-root=/tftp/ -d -u rolf -p0 -K --log-dhcp --bootp-dynamic
dnsmasq: gestartet, Version 2.79, DNS abgeschaltet
dnsmasq: Übersetzungsoptionen: IPv6 GNU-getopt DBus i18n IDN DHCP DHCPv6 Lua TFTP conntrack ipset auth nettlehash DNSSEC loop-detect inotify

Pages

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer