You are here

Home » Forums » Hardware » Nodes

LiteBeamM5 LBE-M5-23-US will not flash Aredn Firmware

3 posts / 0 new
Log in or register to post comments
Last post
Sat, 01/30/2021 - 13:58
#1
AA3JC
LiteBeamM5 LBE-M5-23-US will not flash Aredn Firmware
Just received 3 LiteBeamM5 Model: LBE-M5-23-US that will not flash Aredn Firmware.  All three give me the same error trying to update the firmware to Factory  aredn-3.20.3.1-ar71xx-ubnt-lbe-m5-factory.bin  "Wrong Firmware version is uploaded. Please upload the correct version and try again".  I also tried the Sysupgrade version, and also the Nightly version,  aredn-84-99305c5-ar71xx-ubnt-lbe-m5-sysupgrade.bin also with the same error on all three.  

Searched here in the Forum without any results with this error and hopping someone could shed some light on what I am doing wrong or what I need to do to load the Aredn Firmware onto these LiteBeamM5's.

Thanks in advance.

Attached is a copy of the Support Data:
Support File Attachment: 
File XW-74ACB9F06981.tgz
Top
Sat, 01/30/2021 - 15:45
nc8q
nc8q's picture
trying to update the firmware to Factory aredn-3.20.3.1-ar71xx
Was this a TFTP install following:
https://arednmesh.readthedocs.io/en/latest/arednGettingStarted/installin...
?
Or, was this an 'upgrade' procedure from AirOS ?

Chuck
 
Top
Sat, 01/30/2021 - 16:31
(Reply to #2)
AA3JC
No up to my posting, as all
No up to my posting, as all my other Rockets, etc were upgraded from the factory firmware simply by logging into and running the upgrade from within.  Never had to do TFTP in the past.....Right after I posted, I remembered something about it, and low and behold, found the TFTP page, followed it and it worked!!!! Thank you for the reply, I appreciate it.
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer