You are here

Home

Hardware

Your search for "28" gave back 1043 results.
Results for Forum Topic

Is the Qualcomm Atheros QCA9377 chip able to use channel -2?

published by KM6SLF on Thu, 07/08/2021 - 02:04
Forums: 
Hardware
I'm looking at picking up an eval kit, with the intention of setting up a mesh service on it, but I noticed it has the Atheros QCA9377 WiFi chip. That looked familiar to me- is it one of the chips that we can access amateur exclusive channels with?

Ubiquiti LiteBeam Gen 2 LBE-5AC-Gen2-US

published by K2PMD on Sun, 07/25/2021 - 11:02
Forums: 
Hardware
Hi all,

I just purchased these Lite Beams and wonder if they are flash-ready. I realized after I hit the purchase button that they are not exactly the same as the ones on the Supported Platform Matrix. Will I be able to flash these?

Thanks
Paul K2PMD 

Aredn in a virtual machine environment?

published by N3WTT on Fri, 05/10/2019 - 15:12
Forums: 
Hardware

Please forgive me if this appears as a stupid question as I am still quite new to this. But my (limited) understanding is ARDN is based off openwrt, or maybe better phrased as the hardware needs to be able to run openwrt. Since a few Google searches turn up some information regarding openwrt running in a virtual machine does this mean the same would hold true for arden? Could the firmware run I'm a virtual environment as well?

Again sorry if this is a silly question.

FitPC4 w/ WLE200NX - Ruggedized integrated node/server?

published by KM6SLF on Fri, 07/30/2021 - 01:18
Forums: 
Nodes
Good evening AREDN community, I recently picked up a Compulab FitPC4 pro - specs & documentation available here: http://www.fit-pc.com/wiki/index.php/Fit-PC4:_Documentation

hAP AC Lite tempermental flashing

published by w8erw on Mon, 08/02/2021 - 08:46
Forums: 
Nodes
This has been mentioned and addressed earlier.  I'll just add my recent experience with flashing three new hAP AC Lite nodes.
The first one went just like silk, not a glitch to be had.  Number two, not so easy.  It took three attempts for it to finally take.  The last one
was a real chore.  I spent three hours altogether trying to get it to load and accept the AREDN Firmware.  The last attempt required much more
waiting for things to complete.  These devices appear to have a mind of their own and decide how they proceed with the flashing process.
 

hAP problems... What's going on?

published by KM6SLF on Sat, 12/19/2020 - 22:22
Forums: 
Nodes
I installed the latest nightly on a hAP AC lite, but when I try to install tunnel software the installation fails. Is there another way to install tunnel softare?
ERROR:
Package installation failed!

Tunnel software needs to be installed.

 

Supported devices

published by AC2OG on Fri, 07/30/2021 - 13:29
Forums: 
Nodes
In the devices supported list the model UBNT PBE-M5-620 is included, but, here in Europe, this is no more available. The model UBNT PBE-5AC-620 is available. Is this Model UBNT PBE-5AC-620 supported too? 
Thanks for the clarifications. 
 
 

Reset MIKROTIK hAP ac lite

published by KI0KY on Thu, 08/12/2021 - 13:32
Forums: 
Nodes

I have done something to the MIKROTIK hAP ac lite so that using a either net cable to a lan port entering localnode.local.mesh:8080 returns "localnode.local.mesh's server address could not be found." I have tried three times to reset the unit using the power off, press reset with power on.
Suggestions please.
Steve KI0KY

Air Router TFTP Failure

published by K0SPN on Fri, 07/30/2021 - 17:00
Forums: 
Nodes

Have some Air Routers that won't TFTP flash for some reason.
I've followed the instructions from the site and the pdf file (reset button, tftp.exe -i 192.....) and also tried the tftp2 program I used when doing AR units a couple years ago.
I can ping the units at 192.168.1.20
The programs do seem to be attempting, and the AR 1-3 2-4 lights flash speed slows down as if it's working on something but no go.
tftp.exe gives "error code 0, timeout expired, retries expired", and tftp2 says "unable to get response from the server".

I also found this post :

CPE510 v3 TX power

published by N3KAL on Sat, 05/11/2019 - 10:27
Forums: 
Hardware
Does anyone know the max tx power for the TP-Link CPE510 v3?
I'm seeing various numbers from 23dBm to 27dBm including mixed info even on the datasheet/tp-link website. My searches on the forums have brought up older versions (< 2018).
Thanks in advance for any insight!
Rob

Pages

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer