You are here

Home

Hardware

Your search for "28" gave back 1043 results.
Results for Forum Topic

Nanostation wind/ice survivability

published by N7TZK on Sun, 09/12/2021 - 17:24
Forums: 
Nodes
I have a 7200' mountain site I'd like to mount a Nanostation M5 on.  It will serve the area I need, I have one, and it is cheaper than putting up a sector antenna plus Rocket M5.   But... the AM-5G17-90 sector antenna's specs include "wind survivability" data... and I find no such info on the Nanostation.  Can anyone tell me whether the Nanostation can survive the wind/ice of a mountain top site?  Or should I bite the bullet and invest in the sector antenna/Rocket combo?

Thanks
Dave

2 Issues Hap-ac-lite

published by VA7DGP on Thu, 08/19/2021 - 19:44
Forums: 
Nodes
VA7DGP-Hap-YVR.

I'm unable to log in. I can only get to GUI. I click setup. Root then password. I can't open up setup.


VA7QU-Hap- YVR.

 I can't get access to the Internet. Wan Address and Wan Default:  None

I've Lan attached and added Home ISP wifi router info.
I'm hoping to use VA7QU-Hap-YVR as a portable Aredn that we can use at Ham Meeting out in the Park.

73

Don va7dgp/va7qu

 

RocketM2 with USB port - Untested Hardware!

published by WA3LAB on Thu, 09/09/2021 - 13:02
Forums: 
Nodes

I flashed AREDN version aredn-3.21.4.0-ar71xx-ubnt-rocket-m-factory.bin on an older(2009?) Rocket M2 with a USB port.  The unit took the update, but it shows a banner of "Untested Hardware" and the unit will not operate on channel -2.  It shows the actual frequencies in the channel pulldown window, such as 2.212 GHZ, 2.417 GHZ, etc. It appears to receive OK on 2.412 as I can see my home wireless AP.   The data shown when I click the banner is shown below.  Anyone have an solutions?
Glenn WA3LAB
!!EDIT!!  I found a post from 2015 about this problem, but no solution.

High power amplifier for 5G

published by KI5RPE on Wed, 09/15/2021 - 13:13
Forums: 
Nodes
any recommedations for 100watts amplifier for 2.4Ghz and 5Ghz band?

Empty wifi scan

published by kd4nfb on Sun, 09/19/2021 - 15:16
Forums: 
Nodes

I've search multiple places and haven't found any similar posts. I just installed 3.21.4 on a new LHG 2 and it can't see my HAP AC. It actually can't see anything. When I look at the wifi scan, it's empty. No AP's are shown. I've tried changing various settings, but nothing changes. I've also looked at the support log and can see wlan0 is initiated, so I think that means it should be working. Does anyone have any suggestions or troubleshooting ideas?

Thanks.

900mhz node availability

published by AA4AG on Thu, 09/23/2021 - 05:58
Forums: 
Nodes

Our group needs additional 900mz nodes. Looks like m9 and m900 are no longer in production. What is the future of 900mhz mesh nodes? Will other equipment be supported?

LDF5 AC?

published by KM6SLF on Wed, 11/25/2020 - 01:07
Forums: 
Nodes
Good evening folks. I picked up an LDF 5, ID: RBLDFG-5acD.

I'm having trouble flashing ARDEN using the Windows Tiny PXE server method. Is this hardware supported?

TS5-PoE config

published by KJ7ITZ on Tue, 09/28/2021 - 23:53
Forums: 
Network Switches
howdy,
I dont know why but I am missing the line from A to B.
pB400 config,
Mesh RF 10.236.177.149/8
Lan 10.101.140.169/29
WAN DHCP ( from RPI4 10.1.1.2 )

SInce the pb400 has 1 eth, i made bridge from an RPI4, eth is 10.1.1.1/28 (dhcp to pb400) bridges to Wlan0 172.16.5.x to the internet router of 172.16.5.1
Which TS5 config is this? 2 LAN 2 NODE 1 WAN?


pb400 <>TS5port?
radio pc<>TS5port?
RPI4_bridge<>TS5port5

Thank you for your support.
KJ7ITZ
 

Getting connected to configure EdgeSwitch 5 XP

published by KD7DHO on Sat, 09/25/2021 - 17:57
Forums: 
Network Switches
Simple question, how do you connect the EdgeSwitch 5XP to the laptop to configure 3 ports for POE operations and 2 ports for LAN operations.  The unit looks like the ToughSwitch I'm replacing, but I didn't set that one up.  The tutorials I'm seeing on Youtube already have the Switch linked to the laptop and a nanostation.  I need the instructions to making the connection and setting up in the browser to be able to configure the unit.  I've done that in the past with bullets and nanostations, but not with the EdgeSwitch.  I'm wishing I had the computer expertise to do this without help, but I'm

Ubiquiti IsoStation AC

published by KI6GOA on Fri, 10/08/2021 - 16:24
Forums: 
Nodes

Greetings all,

Pages

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer