You are here

Home

Network Switches

Your search for "29" gave back 121 results.
Results for Forum Topic

TP-LinkTL-SG108E

published by G6LVS on Fri, 06/24/2016 - 18:34
Forums: 
Network Switches

I want to configure my TP-Link For use with my Ubiquiti Rocket M2 for Tunnel and internet. Can anyone help please.

Cheers

Derek

VLAN Setup for Ubiquiti AirRouterHP ?

published by n4ldr on Fri, 01/29/2016 - 00:06
Forums: 
Network Switches

Anyone have a some information for setting up the Air Router HP VLAN ?
Using the WiFi to provide WAN.
Seems every switch has to be completely different.

73 N4LDR

Netgear GS105e configuration

published by al1q on Sun, 08/21/2016 - 00:22
Forums: 
Network Switches
Good evening!

I've read this article:

http://www.aredn.org/content/configuring-netgear-gs105e-switch-lanwan-ports

It says in the first paragraph, "The Ubiquiti devices only have 1 network port".  Since the AirRouter (and AirRouter HP) have multiple ports, does this mean the article is intended ONLY for Ubiquiti devices with one port? 

At least, that's the way I read it.

Thank you!

73, Jeff AL1Q

Trying to track dow and fix DtD connections failing

published by wa2ise on Thu, 07/21/2016 - 14:12
Forums: 
Network Switches

In the thread "VLAN Setup for Ubiquiti AirRouterHP ?" I've been having trouble with a DtD link between my Bullet M2, a AirRouter HP and a NanoStation m900.

EdgeRouter X

published by W4DCE on Thu, 09/15/2016 - 16:57
Forums: 
Network Switches

Has anyone successfully setup an EdgeRouter X?  If so, I'd love some advice.
I'm trying to configure for 1WAN, 2Node, and 2LAN  as follows.

EN0 - This has POE in
     EN0.1 VLAN 1 - Management - and connected to WAN.  I successfully get a DHCP reservation and can connect to the console. 
EN1 - LAN A
    EN1.11 VLAN 11 - for LAN A
EN2 - NODE A
    EN2.2 - VLAN2 for DtD
    EN2.11 - VLAN 11 for LAN A  (I have corrected this to provide a LAN to Node A). 
EN3 - LAN B
    EN3.22 - VLAN 22 for LAN B
EN4 - POE out. 

NetGear GS108Tv2 Setup

published by KL5T on Wed, 03/23/2016 - 11:38
Forums: 
Network Switches

Hi all,
Looking for some help setting up a Netgear GS108Tv2 switch.  I’ve read and read about all this but just can’t seem to get my arms around it.  Here’s the situation:

WAN Routing Between 192.168.1.x and Mesh LAN

published by K1baa on Wed, 09/28/2016 - 21:54
Forums: 
Network Switches
My non mesh LAN and WAN (Internet) is on a 192.168.1.x network. My mesh LAN is on a 10.x.x.x network. I want to get to the 10.x.x.x network from my workstation on my 192.168.1.x and vice versa. 

How do I get a static route in my mesh node that points back to an interface on the 10.x.x.x network as the next hop to the 192.168.1.x network?

Thanks

Bret K1BAA

 

Error in Netgear 1Node3LAN1WAN configuration

published by WU2S on Sun, 10/09/2016 - 16:58
Forums: 
Network Switches
I just noticed an error in Netgear 1Node3LAN1WAN configuration.

For this configuration, in the second picture "VLAN Membership for VLAN 1" Port 5 should be a "U" NOT a "T" as shown. Otherwise, the rest of the diagrams are correct.

 

VLAN renumbering

published by W9GYR on Mon, 12/19/2016 - 16:43
Forums: 
Network Switches
I would like to connect mesh nodes to a large network of Cisco switches where it would be difficult to reconfigure the existing vlan assignments to use vlans 1 and 2. Is it possible to renumber the vlans used by the mesh node? For example:

vlan20 WAN
vlan100 LAN
vlan110 DtD

-mikeu

Pages

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer