You are here

EdgeRouter X

4 posts / 0 new
Last post
W4DCE
W4DCE's picture
EdgeRouter X

Has anyone successfully setup an EdgeRouter X?  If so, I'd love some advice.
I'm trying to configure for 1WAN, 2Node, and 2LAN  as follows.

EN0 - This has POE in
     EN0.1 VLAN 1 - Management - and connected to WAN.  I successfully get a DHCP reservation and can connect to the console. 
EN1 - LAN A
    EN1.11 VLAN 11 - for LAN A
EN2 - NODE A
    EN2.2 - VLAN2 for DtD
    EN2.11 - VLAN 11 for LAN A  (I have corrected this to provide a LAN to Node A). 
EN3 - LAN B
    EN3.22 - VLAN 22 for LAN B
EN4 - POE out. 
    EN4.2 - DtD
    EN4.22 - VLAN 22 for LANB

SWITCH0 has no EN ports connected.  

I'm not getting devices to show up on DtD with this setup.  Can anyone see an obvious problem?  ...or have a successful configuration to share.

K5DLQ
K5DLQ's picture
looks like if you plugged a
looks like if you plugged a second node into EN4, it should DTD betweek EN4 and EN2 (via VLAN2)
W4DCE
W4DCE's picture
Thanks Darryl.  That's what I
Thanks Darryl.  That's what I hope would happen.  ....but in a test yesterday it didn't seem to work. Maybe I wasn't waiting long enough, or maybe I had another setting that was messing things up.  I'm new to VLAN setup.  Thoughts and advice welcom.
-Derek
N4RT
N4RT's picture
EdgeRouterX
Hi Derek,

If you get that EdgeRouter working, please let me know.  A fellow ham here has one and we don't know how to configure it.  Screenshots of your setup would be appreciated.  Personal email is good on QRZ.com.

73,

Ron N4RT
Bromley, AL

 

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer