Hardware

#Please move to the right category if needed I recently managed to save a couple RB411AR from being trashed as its seems like they are currently being decommisioned in my area. They are fitted with R5SHPn 29 dbm mini pci cards each and are atleast supported by OpenWRT. By googling a bit it also looks like they are identical to the RB435 which simply offers a few more mini-pci and possibly others with similar CPU and storage type.

i just got my cpe510 flashed but noticed snr says n/a will that only work if other users are nearby?

I'm both ashamed of myself for having gotten into this mess in the first place, but also proud of myself for figuring out how to fix it on my own. So I figured I'd share on here in case someone else runs into the same issue.

Is there any issues with Mikrotik devices that state US Version? I couldn't fine any reference either way searching the forum.

I bought the hAP lite thinking it could power the CPE210 out the PoE port 5. Both devices advertise themselves as 24 volt passive PoE, so I thought they'd be compatible. However, The CPE doesn't receive power when connected to port 5 of the hAP. On the other hand, the hAP can be powered by the PoE injector that came with the CPE. 

Is there a single PoE switch that can power both devices?

Dear all. VLAN is tricky..
 
Running here a Netgear GS108E switch. We have 3 mesh nodes connected on port 1, 4 and 6. On the system the mesh nodes appear as DTD, which is correct. The mesh node on port 1 is hosting our PBX PC, this pc is plugged in to Port 2. A phone we have plugged in on port 3.

Dear all. Having currently a REOLINK RLC-520 on our AREDN Mesh system for testing. The cam works fine but i am not able to have the service steady on the node: IP is reserved for the cam and on the right in the section advertised services the cam has been advertised on the network ( see attachment). After saving and rebooting the node the service is advertised, but after a while the camera is not advertised anymore, it has to be redone.  Mouse over the icon exclamation mark it says "service is not been advertised". Any suggestions? Regards HB9FND, Alex
 

So the hAP has a PoE IN port. Unfortunately, it's set as the WAN port by default. I need ti to be a trunk to the PoE switch so I can connect DtD nodes and LAN devices to the PoE switch and have it work properly. Is there a way to do this?

Hi, everyone,

I have a couple of questions about the Nanostation M5 that's in the supported matrix (the XW that is linked to an Amazon page). Does the PoE passthrough work on the secondary port, and if so, how many volts does it provide? We are thinking about mounting a PTZ camera that requires 48 V via PoE on a tower and powering it through the passthrough on the Nanostation. I'm wanting to make sure it will work.

Thanks and have a great day. :)
Patrick.