Hello dear Hams, I have a phenomenon with several HAP AC and GL 300M nodes. All devices use the same RF mesh channel and bandwidth. Oddly enough, only the AC Lite and the GL300M connect to each other. All nodes are only listed when I connect a GL to a Lan port. Do I have a configuration error or a mistake in reasoning? Greetings Thomas DF2TH
The hAP AC Lite is supported. The hAP AC is not. See the supported hardware matrix: https://www.arednmesh.org/content/supported-platform-matrix
I use the hap ac lite only
What freq and bandwidth? The MikroTiks sometimes work on 5Mhz but mostly not.
all Nodes are workking on channel -2 2397 MHz with 5MHz Bandwith. all Hap Lite are connected each other and GL-iNet 300 also, but not connection between hap an gl nodes via RF Mesh
At 5 MHz bandwidth, Mikrotiks link with each other, but often not with other manufacturers.
thanks a lot for Information
See https://github.com/aredn/aredn/issues/41 and
https://arednmesh.readthedocs.io/en/latest/appendix/known_issues.html#known-issues
thanks a lot for Information
Switch your nodes to 10MHz channel width and they should link.