You are here

Home

Nodes

Your search for "30" gave back 615 results.
Results for Forum Topic

AREDN to AirOS (Goting back Ubiquiti) - can it be done?

published by K1DOS on Thu, 06/13/2019 - 23:53
Forums: 
Nodes
Is it possible to switch a NanoStation back to AirOS after being converted to AREDN?

new HAP-ac RB592Ui-5ac2nD-US will not accept latest .elf file

published by K3MMB on Fri, 11/30/2018 - 16:01
Forums: 
Nodes
Got shiny new hap-ac today.  Tried the windows trick to load aredn, it failed. switched to RPI and dnsmasq method .
Multiply attempts fail to load the current nightly build elf file.

Cold stated hap-ac load most current firmware (6.43.3 (2018-Oct-05 13:12). 

attached file has dhcp log from fail elf load and latest info on stock firmware.

any ideas??
regards
mike


 

Can I load AREDN firmware on a GL.iNet 150M?

published by AC8QE on Sun, 06/16/2019 - 23:04
Forums: 
Nodes


Can I load AREDN firmware on this GL.iNet device:

GL.iNet 6416 AR9331 802.11n 150Mbps Mini Wireless WiFi Router OPENWRT Firmware Wi-Fi Repeater Travel Router 16MB Flash/64MB RAM

If yes, can you provide a link to the firmware?
It is compatible to the  TP-Link WR703N

thanks
stprovost


Here is the specs:

Ubiquiti airGrid AG-HP-5G23

published by KI7CC on Sat, 06/29/2019 - 17:22
Forums: 
Nodes

No Range Ubiquiti airGrid  AG-HP-5G23

Migrate from HSMM to AREDN on Bullet M2 high power

published by NH6HI on Sun, 07/07/2019 - 19:16
Forums: 
Nodes
Aloha,
I was given a M2Bullet High Power FCC ID SWX-M2B and have searched the archives and found this thread ( https://www.arednmesh.org/content/bbhn-aredn ) Maybe there's another thread I missed.
They mentioned BBHN 3.1.0 but the one I have has 3.0.0. How do I migrate it over to AREDN without bricking it?  The plan is for a portable node for now. I know it's not the latest and greatest but it's free and I hate to see it wasted.
Jim NH6HI

hap-less

published by KM4DC on Sat, 07/06/2019 - 07:21
Forums: 
Nodes
Greetings,
My Mikrotiik ac lite (RB952Ui-5ac2nD-US) was working great for months.
It was running aredn-960-d8f9320-mikrotik-rb-nor-flash-16M-ac-sysupgrade firmware.
But, I turned it on this morning at there are no port lights, no Ethernet.
I did a reset and still no Ethernet ports. (Hold reset, apply power, wait for light)
I'm guessing a hardware failure but wanted to see if anyone had an idea no how to get it working.

And, thinking ahead - if it is toast; is there a better replacement?

GL-150 Tunnel Client/Server

published by n9ms on Mon, 05/13/2019 - 09:08
Forums: 
Nodes

My GL-150 works great EXCEPT I am unable to install either the tunnel client or server. I get a message: Package Installation failed. Is this a limitation of this device?

New to AREDN

published by LA9UI on Fri, 06/07/2019 - 09:29
Forums: 
Nodes
Hi!

I am trying to set up a mesh in Northern Norway. I have 2 Nanobridge M5. Installed Aredn 3.19.3 on both, OK. Was setting up with default values. Seems to be working, but the two radios (running barefoot) does not see each other. They are a few meters apart, with low power. Can anyone tell what I am doing wrong?

Hans-Petter  LA9UI

Mikrotik LHG HP5 w/nightly build issues

published by K6BAT on Wed, 07/17/2019 - 01:03
Forums: 
Nodes

I was able to flash a new LHG HP5 radio with the nightly build (7/3/19), and the hardware is recognized correctly (I see this model was added to the code after the 3.19.3 release). I am able to link to Pleasants on 174. However, I cannot seem to pass traffic outside my node. First I thought it was just DNS not working, but if I ssh into the node I cannot ping anything outside my network, even though I seem to have a "good" wireless connection. I'll attach a supportdata file if that helps. Any suggestions? Or should I just be patient and wait for a release that covers this model?

GL-USB150 Failure

published by KD1HA on Wed, 05/22/2019 - 16:16
Forums: 
Nodes
Updating the GL-USB105 from Nightly build 942 to 948. I tried several times to update and each time it went though the motions but at the end it remained build 942 no warnings just came up with 942. I removed the stick to try a different computer and that is the last time it booted. It will not reset and the only sign of life is a momentary green led when it's plugged in. So the question is will a TFTP restore it or is there another procedure? Not much I can find on this topic.
 

Pages

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer