You are here

Nodes

Your search for "30" gave back 615 results.
Results for Forum Topic

XW nanostation dtd on secondary port

Forums: 
I just got a nanostation M5. It turned out to be an XW model. I flashed it with AREDN 3.15.1.0. I racked my brain for hours trying to get it DTD'd to my 2.4 and 5 GHz nodes. It might be well known to some here or it might be a fluke, but I discovered quite by accident that my Nanostation XW M5s dtd link on the secondary Ethernet port but will not link on the primary. Just a heads up in case someone else gets a node that links this way.
73,
Anne

3GHz Hardware

Forums: 
Where are most of you buying your 3GHz Hardware (nodes, antennas)? I'm having trouble finding vendors who sell that here in the USA.

Thanks,

August KG7BZ

AirGrid AG-HP-2G20??

Forums: 


Am I reading the Supported Platform Matrix correctly in that there is no 2.4 AirGrid XW listed?  

What does that mean for the AG-HP-2G20?  I'm guessing it's not supported, but I'm not sure.  Please clarify.  

Thanks much!

NanoStation M900

Forums: 

Is the NanoStation M900 supported? Is it the same radio as the M9? Looking at one online.

New Hardware (PC Engines APU2)

Forums: 
I have sat here a PC Engines APU2 http://www.pcengines.ch/apu2.htm (actually an APU3A4) and whilst wondering what to do with it, I noticed that its on the firmware list for most linux distros, and coming with a wan port and two lan ports made me think, has anyone had a play with these devices. The one I have I am considering installing asterisk on and sticking a backup 3g sim in it.

Any thoughts or ideas?

Ubiquiti Bullet M5

Forums: 
I have a Ubiquiti Bullet M5 with stock UBNT firmware. I have a 7dbi omni antenna that I know works. The unit will does not transmit, at least according to my 5.8 GHz-capable tablet. I upgraded to the latest 5.5.x UBNT firmware and I got a signal from it for about 15 seconds then it was gone.

Is the unit bad or flaky? I've had it for some time but this is the first time I've connected it up and tested it. The other question is would putting the Aredn firmware correct the problem?

Thanks in advance.

John
kf7nqw

Rocket M5 XW

Forums: 
any word on when a flash might be available for the XW?

It's getting increasingly  difficult to find these new  (and even used) that are XM.

Tim

Nanostation5 firmare image

Forums: 
I just purchased two Nanostation5 units. When trying to load the Aredn firmware 3.15.1.0 I continually get a message stating I have a bad firmware image. I have downloaded several times now with no luck and have tried both the XM and XW images with the same results. 

The box states the Nanostations are loaded with AirOS v.4 which is consistent with what I see when going to the system tab to begin the update so I am certain I should be using the XM version of the image and should not be having the problems referenced related to V5.6.

Thank you

Nano bridge M2 w/V3.17 will not save or upgrqade

Forums: 

After loading V3.17 and upgrading from AirOS I can not get the setup to save my call, password and miles. I do the apply and then save changes. It reboots and  shows the reboot status screen. I have to re-log in to see the node status screen but nothing has changed or updated.

Any ideas?
Larry W6LAR
 

tftp error code

Forums: 

I have a handful of bricked Nanostations I'm try to recover.  Three of them (Nanostation Loco M2 and two Picostation M2s) that, during a binary tftp transfer report:  "Error code 2: firmware check failed".  This happens regardless of what firmware I'm trying to install.

Any ideas?

------------------

Pages

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer