Nodes

Just getting into this and I'm looking for the TP-Link CPE510.  A search on Amazon keeps turning up this package for two EAP-115 bridge nodes.  I'm wondering if this is the same thing, just given a different part number for the package.  Can anyone confirm this?

If they are different, has anyone tried putting the AREDN firmware on one of these?

I've had a subset of Mikrotik 5G LHGs and SXTs (they use the same motherboard) load the rb.elf file but refuse to take the second step and load the sysupgrade.bin.  I posted and got a lot of help here (links below) but no solution.
https://www.arednmesh.org/content/mikrotik-router-boards#comments

What are the default port speeds?  Is this something can be changed/set?  10 vs. 100, Half vs. full?
 

Is it possible to revert to factory firmware by installing the factory firmware bin?  I don't want to brick the HT-7608.

thanks

diana
KI5PGJ

Can the WAN port on a GL.iNET AR300M be changed to LAN to DTD connect to neighbor node?  If so, How?

I recently replaced a Mikrotik hap lite with a Mikrotik ac3. The function is a tunnel node with internet on the WAN port, a DMR repeater on a LAN port, and a Rocket 5ac Lite on the DTD port. The hap lite worked as intended - when internet is out, DMR traffic is routed to the DTD port and over an RF link.

The ac3, configured the same as the hap lite, does not route DMR traffic to the DTD port when internet drops out. The ac3 is running 3.25.8.0. 

Any thoughts?

Many thanks,
Jay K1EHZ

 

Is this the Lite Beam listed on the Aredn Matrix as usable? https://www.amazon.com/LiteBeam-LBE-5AC-Gen2-Ethernet-Protector-High-Spe...
Thank you.
 

Hi All, 

I'm brand new to this and hoping to be the first node in the South Bay of Los Angeles, which is surprisingly devoid of any other users. I just received my Mikrotik hap ac3 and litebeam. Couple questions:

1) I see the move to Babel. For the Mikrotik, I downloaded the latest stable release, 3.25.8, for install. Does this automatically include the new babel protocol or should I instead download the firmware that actually says babel? From reading the babel announcement/release, it wasn't clear. My goal is to load firmware once and be done with it.

Just bought two Mikrotik-952ui-5ac2nd routers from Amazon.  Neither responded to the Tiny PXE server.  The two units I purchase last year, program without a problem using the same equipment and process. Tried two different computers and switches without success.