I recently replaced a Mikrotik hap lite with a Mikrotik ac3. The function is a tunnel node with internet on the WAN port, a DMR repeater on a LAN port, and a Rocket 5ac Lite on the DTD port. The hap lite worked as intended - when internet is out, DMR traffic is routed to the DTD port and over an RF link.
The ac3, configured the same as the hap lite, does not route DMR traffic to the DTD port when internet drops out. The ac3 is running 3.25.8.0.
Any thoughts?
Many thanks,
Jay K1EHZ
The ac3, configured the same as the hap lite, does not route DMR traffic to the DTD port when internet drops out. The ac3 is running 3.25.8.0.
Any thoughts?
Many thanks,
Jay K1EHZ
I would like to see the Network page: Advanced options
on both your hAP-ac-lite and your hAP-ac3.
73, Chuck
Here are the hAP lite (default configuration) and hAP ac3.
The LAN to 44Net & LAN default route are reversed
between your hap-ac-lite and your hap-ac3.
Check your 'ETHERNET PORTS' assignments, too.
73, Chuck
The ac3 began working as expected with the configuration shown. Not sure what the problem was, but it no longer exists, at least for now.
73,
Jay