Hardware

Hi All,
I recently acquired two GL-150USB microuters from Amazon. Both come up with the original code, I set the default password as required and flashed one with the current 960 load from the nightly builds, and the other with the 902 load which was given to me and has worked on previous occasions. Both appeared to flash properly, they came up with the NOCALL page, I was able to set the parameters for the MeshRF and reboot to obtain a 10.x.y.z address in both cases.

I am trying to set up my ProCurve 2650 and things arent adding up right.  I looked at one of the other models specs here on this site to see how they are being configured, and tried to modify it to my needs.  here is my physical port assignments
port 2 PC
port 47 Nanostation running DHCP server
port 48 Rocket dish with NAT 192.168.0.200
port 49 Wan connection to router

I want to use ports 40-46 as lan ports for the nanostation on port 47.
I want to DTD the 2 units on ports 47-48.
I want a WAN connection to port 48.

Hi All, I've been searching for high gain directional antennas for 2.4 GHz AREDN that are not sector antennas and so far all I have found are these parabolic dishes. On top of that it looks like these wont cover the frequency range we need (except for the last one.) Any recomendations for high gain directional antennas that won't break the bank? http://flyteccomputers.com/product/572/L-Com-HG2424EG-NF-24-GHz-24-dBi-D...

Is anyone currently working with single-polarity spatial diversity, or is this a possibility with AREDN on nodes with two antenna ports?

Good evening!

Do the main and secondary ports on the NanoBridge work the same way as the NanoStation, as per this article?

https://www.arednmesh.org/content/standardized-nanostation-xm-ethernet-p...

Thank you!

Jeff Stidham AL1Q

Is it possible to switch a NanoStation back to AirOS after being converted to AREDN?

Got shiny new hap-ac today.  Tried the windows trick to load aredn, it failed. switched to RPI and dnsmasq method .
Multiply attempts fail to load the current nightly build elf file.

Cold stated hap-ac load most current firmware (6.43.3 (2018-Oct-05 13:12). 

attached file has dhcp log from fail elf load and latest info on stock firmware.

any ideas??
regards
mike