Hardware

Is it possible to revert to factory firmware by installing the factory firmware bin?  I don't want to brick the HT-7608.

thanks

diana
KI5PGJ

Can the WAN port on a GL.iNET AR300M be changed to LAN to DTD connect to neighbor node?  If so, How?

I recently replaced a Mikrotik hap lite with a Mikrotik ac3. The function is a tunnel node with internet on the WAN port, a DMR repeater on a LAN port, and a Rocket 5ac Lite on the DTD port. The hap lite worked as intended - when internet is out, DMR traffic is routed to the DTD port and over an RF link.

The ac3, configured the same as the hap lite, does not route DMR traffic to the DTD port when internet drops out. The ac3 is running 3.25.8.0. 

Any thoughts?

Many thanks,
Jay K1EHZ

 

How can I restore the wi-fi?  I see no way to set the country or status 

I just boIught a hAP AC2 and I am trying to load the firmware. I got the rb.elf file to load but I can't find the device by putting in 192.168.1.1 to go further to load the sysupgrade.bin file.  Has anyone had this issue before?
 

Hi All, 

I'm brand new to this and hoping to be the first node in the South Bay of Los Angeles, which is surprisingly devoid of any other users. I just received my Mikrotik hap ac3 and litebeam. Couple questions:

1) I see the move to Babel. For the Mikrotik, I downloaded the latest stable release, 3.25.8, for install. Does this automatically include the new babel protocol or should I instead download the firmware that actually says babel? From reading the babel announcement/release, it wasn't clear. My goal is to load firmware once and be done with it.

Just bought two Mikrotik-952ui-5ac2nd routers from Amazon.  Neither responded to the Tiny PXE server.  The two units I purchase last year, program without a problem using the same equipment and process. Tried two different computers and switches without success.

Trying to load the firmware and below is what I received from tinypxe. I cannot connect to the aredn admin at 192.168.1.1 page now, so am questioning if it loaded the firmware correctly. I have tried clearing cache, recycling power on the router, resetting the rj45s in the router and computer, all to no avail. 

I have followed the instructions at https://docs.arednmesh.org/en/latest/arednGettingStarted/installing_firm... to a "T". I had to upgrade the firmware to 8.7.4, no problem. But I can't copy the AREDN firmware to the Litebeam. 

From the command prompt, I tried 
scp <aredn-image-factory.bin> admin@192.168.1.20:/tmp/factory.bin

No go- received unable to negotiate error.