AREDN highly recommends upgrading to AREDN security release v3.20.3.1
For more information see the Latest Docs page
AREDN highly recommends upgrading to AREDN security release v3.20.3.1
For more information see the Latest Docs page
The AREDN® team is pleased to announce the start of a new program to recognize people who are actively contributing to spreading the word about how hams can use our 21st century mesh networking technology to provide high-speed data communications when disasters strike.
We call these special people “AREDN® Ambassadors”.
These are key members of our community who:
Congratulations to each of you!
It is finally here! We are looking forward to seeing you at Hamvention in Xenia, Ohio this Friday through Sunday, May 17-19.
We are in booth #1001. We will have a lot of equipment on display, including some of the newest gear from Mikrotik and our fourth supported manufacturer GL-iNet.
In addition to the new hardware, we have made a lot of improvements in the firmware. We want to hear your comments and questions on the recent changes. As always, your ideas help us set the direction for future enhancements.
We will hold some short classes on a variety of topics to help get you started or to extend your capabilities.
Stop by our booth and say hello.
The NanoStation XM devices now have fully functional ports - both main and secondary. This capability will be in Dec 3, 2018 nightly build. The behavior is now same as NanoStation XW devices. POE Passthough is also functional.
This new capability means the following usage is significantly simplified to setup. At local community events when setting up ipCams around a parade route or event area, there can be a station with 2 nodes -- incoming link on one channel/band and outgoing link on another channel/band. This means many HD video quality signals can go through the station as this relay station does not share the same frequency.
2 mesh nodes, 1 ipCam, 1 5-port switch, 4 way power split to all devices, junction box. Lots of labor and points of failure to build and configure the enclosure and cabling.
2 mesh nodes, 1 ipCam, daisy chain the cat5 cables though these devices, no enclosure.
1) I've seen a NSM2 XM device...
Thanks to a great suggestion and some content from Steve KC0EUW, we now have an AREDN document repository on GitHub.
If you just want to read what is in the library, you can view the docs on ReadTheDocs.io at https://arednmesh.readthedocs.io/en/latest.
You can also find this documentation by clicking on the Docs menu item on the front page and making your choice from the dropdown list.
We added a new Network Design Guide to help you in planning your local AREDN mesh network.
If you are interested in contributing to the rapidly growing set of AREDN related information, you can easily do so on GitHub. This works the same way as if you were contributing code to the project.
There are detailed instructions on how you can contribute to AREDN documentation in the README.md file
Summary Instructions:
After...
The new Mikrotik devices supported by AREDN are great, but the installation procedure for loading AREDN firmware on them using a Linux computer has been intimidating to many in our community.
There is no reason to fear any longer.
Ray KK6RAY (formerly KM6WUH) devised a procedure to install AREDN firmware on Mikrotik using a Windows computer. The widespread familiarity with Windows and fewer steps in Ray's procedure should greatly reduce any anxiety you may have about trying a Mikrotik unit.
Ray produced a 20-minute video to demonstrate the installation procedure. The video is on YouTube here.
In addition to a Windows computer, an AREDN-supported Mikrotik device (see Supported Platform Matrix), and an Ethernet cable, you will need:
Full functionality of both ports on Nanostation M2 and M5 XW units is now available.
Joe AE6XE found a way to remove the limitations noted in the forum thread. Both Ethernet ports on the Nanostation M2/M5 devices are now configured and working without limitations. This code will be available after tonight's build on Nov 22, 2018. Text included in the AREDN GitHub README:
The following devices have enhanced Ethernet port usage.
A single CAT5 cable to the device could be plugged into ether the 'main' or 'secondary' port with standard port functionality. Both ports can be used interchangeably and simultaneously with LAN devices on both ports at the same time. POE PassThough can be turned on in Advanced Settings to power IP cameras or other mesh nodes. It is passive' POE, which means whatever voltage you supply the M5 XW with, that voltage is passed though to the secondary port and device. It could be between...
Read More
Local amateur radio operators are responding to the recent and ongoing fires in California in many ways. Several of these hams have built a high-speed multimedia AREDN mesh network which was used to deliver live streaming video of the fires in progress.
In Ventura County, Orv Breach W6BI, Paul Straus WD6EBY and Ben Kuo AI6YR installed high-definition cameras in their portion of the growing Southern California AREDN network. They were able to figure out how to send to live video stream across the mesh network to then Internet and finally to YouTube for public access.
Ben AI6YR reports that their mesh network stayed operational even when the Spectrum cable, Internet access and phone system went down across the region. People were able to use the mesh network to keep updated on emergency information.
The start of the “Woolsey Fire” from Simi Valley, courtesy of Orv W6BI and the Pleasant Valley Amateur Radio Club
https://www.youtube.com/watch?v=cowdbebnX5o
The fire in Santa Paula, California (Briggs...
|
LED LightsUbiquiti nodesReading Left to Right - Normal conditions
TP-Link nodesReading Left to Right (lettering upside-down) - Normal conditions
|
Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer