TCP/IP

7 posts / 0 new

Last post

Wed, 04/22/2026 - 21:22

ve2luq

TCP/IP

Hello,

I'm currently programming my routers.

And I can't access my configuration settings.

See the link to better understand my setup

with my IP addresses.

If you could help me so I can access the configuration settings on my Raspberry Pi, for example,

how do I do it with my laptop (10.192.17.80)?

Thank you for your help.

https://docs.google.com/presentation/d/15-SRNngrOyk11DhFZfahUvBDwE_XIyfS...

Luc
VE2LUQ

Thu, 04/23/2026 - 10:33

K6CCC

You don't give a lot of

You don't give a lot of information. What are the devices? It would appear that your "Internet" connection is a router since it is apparently producing the 10.192.17.x IP range, and you have a WiFi AP on that range that the laptop connects to. Then you have another router downstream that has a LAN IP range of 10.1.149.x range that in turn has another WiFi AP with yet another IP subnet. Way too may IP subnets. What are you really trying to accomplish? Describe the task, not the how to accomplish it.

Thu, 04/23/2026 - 19:10

(Reply to #2) #3

ve2luq

Hello to you, first of all

Hello to you, first of all thank you for replying to me,

Ok, the Cudy TR3000 is a supernode, so the WIFI is disabled in the AREDN procedure.

And when I installed AREDN on this CUDY TR3000, that’s when I got this IP address 10.1.149.76 for this Cudy.

Subsequently, from this CUDY TR3000 via 5GHz dishes, I go up mountains to other "Repeater" systems—currently 4 repeaters.

And I want to access my systems remotely from home via AREDN.

Before, I used "Network SWITCHES,"

and with AREDN, these are Mikrotik AC3 routers that I will put on top of the mountains.

And it’s always a different group of IP addresses.

And now I want to, but I don’t know how to do it???

Is it possible to do this?

Thank you for your comments.

73's

Luc
VE2LUQ

Fri, 04/24/2026 - 07:22

(Reply to #3) #4

nc8q

Cudy TR3000, supernode, 5 GHz dishes, repeater systems, remote a

Cudy TR3000, supernode, 5 GHz dishes, repeater systems, remote access,
network switches, AREDN, Mikrotik ac3 router on top of mountains.

Hi, Luc:

Pshew! That is a lot of topics without much information.

1. Why is the Cudy TR3000 a supernode .vs. a default AREDN router?

2. "CUDY TR3000 via 5GHz dishes" makes no sense.
A Cudy TR3000 is unlikely to use a 'dish' antenna.
The Cudy is an indoor device and dish antennas are for outdoors.

3. "Repeater" systems—currently 4 repeaters"
Please tell us a little more about the systems.
Make and model and what is their purpose, RF band, protocol, ...
Who or what are they repeating?

4. "Before, I used "Network SWITCHES,"
Where...at home or at the mountain top?
What devices did this network switch? AREDN? Amateur Radio UHF repeaters?
ALLSTAR, DMR, ...?

5. "these are Mikrotik AC3 routers that I will put on top of the mountains."
Why are you putting indoor devices on top of a mountain?

73, Chuck

Fri, 04/24/2026 - 15:05

(Reply to #4) #5

ve2luq

Hello everyone,

I'm new to AREDN systems, and more specifically, large-scale systems spanning multiple mountains.

This summer, we plan to deploy this system on our VE2CVA network. Several mountain ranges are connected by 5 GHz parabolic antennas.

For a high-performing AREDN system,

with a "RING" backup loop, the signal originates at my location and returns to my location, currently as a backup in case a route goes down for any reason.

This "RING" loop is essential to secure the system and ensure redundancy.

See the link. I'll show you our system in general, which has been operational since 2012.

Next, another image, but this time with MikroTik routers at each site, high in the mountains.

And the third image shows the same system but with network switches.

https://docs.google.com/presentation/d/1jyATwiHew85OEorfRROfd_efhn7PI1lm...

Which one will be best so I can get off to a good start with the AREDN system?

Thank you. Your advice will be helpful so we don't have to start over multiple times, haha.

Fri, 04/24/2026 - 16:22

(Reply to #5) #6

nc8q

VE2LUG multi-mountain network

image #1 https://www.arednmesh.org/content/tcpip
image #5 https://www.arednmesh.org/comment/25923#comment-25923

My queries: 1 ... 5: https://www.arednmesh.org/comment/25920#comment-25920

Hi, Luc:

Sorry, I am not familiar with 'RING'.
I recall 'token ring' from 20+ years ago when I when I studied for my CompTIA Networking+ certification.

1. You did not reply to my query 1.
Please mention something about why the Cudy is an AREDN supernode as
opposed to an AREDN regular node.

2. In the images in '#5' I see a '5 GHz dish radio' next to an IP network switch.
Please tell me more about how this 'dish radio' connects to a network switch.
Does the 'dish radio' have an IP address?
If yes, how does it get it?
Please share a link that will show configuration and/or specification of this 'dish radio'.
Does every 'dish radio' and every camera and every repeater and every Raspberry Pi
have its own IP address?
If yes, then is every network device at home and on the mountains in same /24 LAN?

3. In the images in '#5' I think I see an icon representing a repeater.
Does this repeater get an IP address?
If yes, how does it get it?
Please tell more about this repeater and how it relates to IP networking.
Do the cameras get IP addresses? If yes, how (static or dynamic or)?
Do the Raspberry Pis get IP addresses? If yes, how (static or dynamic or)?

4. I see icons of basic network switches. Thank you.

5. "To fully understand our system, we've been using 5GHz dish radios since 2012, and they work very well."

5a. Why are asking about AREDN networking?
5b. Is there some service you want to add that you do not have?
5c. Adding AREDN or switching to AREDN can move each site into a separate LAN/29 segment, but
each LAN/29 segment can reach the other LAN/29 segments due to AREDN routing.
Each AREDN device is not simply a network switch, it is also a network router.
5d. I notice icons representing a 'sector' style antenna.
Is that the repeater's antenna?
Is that another AREDN radio with a sector 'downlink' antenna to another home AREDN station?

73, Chuck

Thu, 04/23/2026 - 19:08

ve2luq

Hello to you, first of all

Hello to you, first of all thank you for replying to me,

Ok, the Cudy TR3000 is a supernode, so the WIFI is disabled in the AREDN procedure.

And when I installed AREDN on this CUDY TR3000, that’s when I got this IP address 10.1.149.76 for this Cudy.

Subsequently, from this CUDY TR3000 via 5GHz dishes, I go up mountains to other "Repeater" systems—currently 4 repeaters.

And I want to access my systems remotely from home via AREDN.

Before, I used "Network SWITCHES,"

and with AREDN, these are Mikrotik AC3 routers that I will put on top of the mountains.

And it’s always a different group of IP addresses.

And now I want to, but I don’t know how to do it???

Is it possible to do this?

Thank you for your comments.

73's

Luc
VE2LUQ

Amateur Radio Emergency Data Network

Menu SF

You are here

TCP/IP

Amateur Radio Emergency Data Network

Search form

Menu SF

You are here

TCP/IP