You are here

Lan Wireless access lost on hAP AC Lite

6 posts / 0 new
Last post
w8erw
w8erw's picture
Lan Wireless access lost on hAP AC Lite
After loading the most recent nightly build, 2339-05d247d 02-18-2023, I've lost the lan wireless access.  The following message is displayed on my hAP AC Lite:

Configuration NOT saved!
  • Mesh RF and LAN Access Point can not both use the same wireless card, review LAN AP settings
  • Anyone have any thoughts?   Jim W8ERW
K6CCC
K6CCC's picture
Known

Yea, I discovered a bug on at least the hAP lite and iNet AR750.  You will also see that the band selection for the AP is missing.  Details at:
https://github.com/aredn/aredn/issues/720

 

w8erw
w8erw's picture
Additional
I've also discovered I can't revert back to 3.22.12.0.  The two nodes I am working with are spares that I play with the new firmware on.  So, not much of consequence other than hoping the issue gets resolved.  The github is interesting and I've tried the steps outlined there with no success.
Jim W8ERW
 
AB7PA
See the tips for downgrading firmware

You can downgrede the firmware if you want to.  See the steps for downgrading firmware in the online documentation:
https://docs.arednmesh.org/en/latest/arednHow-toGuides/firmware_tips.html#tips-for-downgrading-firmware

K6CCC
K6CCC's picture
Correct on not being able to
Correct on not being able to go back very far.

On the hAP, try turning off Mesh RF, and setup your WiFi on 5 GHz.  Save it, reboot, and make sure it's working.  Then turn on Mesh RF.  It will show that WiFi is turned off with channel 1 set and no ability to change band.  Save it, reboot, and see if the WiFi really is still live on the 5GHz channel that it was before.  That's the way it worked on my AR750.

 
w8erw
w8erw's picture
Resolved it appears
The latest nightly update seems to have resolved the issue - 2347.  
Thanks team,

Jim W8ERW
 

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer