You are here

HELP: Bullet2-H Firmware Question

4 posts / 0 new
Last post
VA3QT
HELP: Bullet2-H Firmware Question

I purchased 3 Bullet M2 HP units off E-Bay.  The are older (Test Date 05/21/11) but in all respects appear to be new and in their original UBNT cartons.  The carton indicates AirOS Ver 3.5.  I've successfully logged into it an the firmware version is "XS2.ar2316.v3.5.4494.091109.1451".  Not surprisingly the UBoot test fails completely (Error: System.IndexOutOfRangeException: Index was outside the bounds of the array.  at aredn.Form1.ParseVersion(String ubString).  I don't see any indication for the board used.
 
Question:  can this unit be upgraded / converted to AREDN firmware?

73,

Ian VA3QT
928-487-2388
va3qt4@gmail.com

K6AH
K6AH's picture
"M2" or "2"

Is the model identified as an M2 or simply 2?  I believe The XS OS supported the model 2 and when the "M" series was introduced it was supported by the "XM" OS.

Andre, K6AH

VA3QT
Andre,

Andre,

Much thanks for your response.  On closer inspection I see that the Bullet I pulled from the box is a model "Bullet2-H" however the second unit is a model "BM2-HP".  The third unit I've given to another ham so can't verify the model at time of writing.  Later this morning I will power up the BM2-HP and see what firmware is on it.

Are you saying that the *2H is a lost cause?

Ian VA3QT/W7

K5DLQ
K5DLQ's picture
"Are you saying that the *2H

"Are you saying that the *2H is a lost cause?"
yes.  non-"M" models are not supported due to not enough memory (and they are really old technology).

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer