You are here

GL Inet USB150 not connecting to mesh

5 posts / 0 new
Last post
VA2XJM
GL Inet USB150 not connecting to mesh

So I got my new USB150 today. Flashed AREDN in less than 5minutes, took time to configure it and reboot.

Everything seems fine except that it do not connects to an hAP less 10ft away.

To validate, I booted a second hAP that established mesh connection properly.

Included support data.

Not sure if I missed something but settings for SSID, bandwidth and channel are good. I also tried different USB port in case the dongle was not properly running on USB2/3, same results.

 

K6AH
K6AH's picture
Try another bandwidth.

Try another bandwidth.

VA2XJM
at 10Mhz bandwidth it works!

at 10Mhz bandwidth it works!

Now, the question is... Is it possible to eventually have it working with 5Mhz or is it a hardware limitation ?

K5DLQ
K5DLQ's picture
this is a known issue...https
VA2XJM
Interesting... Thanks

Interesting... Thanks everyone!

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer