You are here

Home » Forums » Hardware » Nodes

Used NBrM5 - got untested hardware message

15 posts / 0 new
Log in or register to post comments
Last post
Wed, 11/29/2017 - 16:38
#1
VE3CVG
VE3CVG's picture
Used NBrM5 - got untested hardware message

Greetings to the list. Before I submit a report, I want to make sure that I did not do something wrong.
I am working with a used NBrM5 that had Ubiquiti 6.04 XM firmware. It gave a Bad-Good Uboot result. The instructions on the software page show 4 links. 2 are for v5.5 and 2 are for v5.6. But I could not spot anything that explains when to use 5.6 and when to use 5.5. I selected the one for v5.5 XM. When I flashed it, it seemed to go fine and passed the Uboot test with Good-Good. When it boots up, it displays the !!!! UNTESTED HARDWARE !!!! message. Everything else works fine. Should I have flashed v5.6 first, then v5.5? Did I miss those instructions somewhere? What is the best way to recover from this condition?
Thanks. Rick (VE3CVG)
 

Top
Wed, 11/29/2017 - 16:59
K5DLQ
K5DLQ's picture
on that node, can you browse
on that node, can you browse to http://localnode:8080/cgi-bin/sysinfo.json  and post what is returned as the "board_id"?  (ie.  0xe5ee or something like that)
Top
Wed, 11/29/2017 - 17:21
(Reply to #2)
VE3CVG
VE3CVG's picture
I had to leave off the .jason

I had to leave off the .jason extension and just went to sysinfo
It shows a boardid of
0xe235

a line or 2 above that it says it is Ubiquiti Bullet M
Rick

 
Top
Wed, 11/29/2017 - 19:36
(Reply to #3)
K5DLQ
K5DLQ's picture
it was .json not .jason
it was .json not .jason
What version of AREDN are you running?
 
Top
Wed, 11/29/2017 - 20:20
VE3CVG
VE3CVG's picture
The NBrM5 shows 3.16.1.1  
The NBrM5 shows 3.16.1.1
 
Top
Wed, 11/29/2017 - 20:29
VE3CVG
VE3CVG's picture
Darryl, btw sorry but if I
Darryl, btw sorry but if I include the .json extension ... it does not work. It has to be just localnode:8080/cgi-bin/sysinfo then I get a nice neatly formatted text page of technical info.
Just out of curiosity i tried chrome and IE - similar result.
Thanks.
Rick
Top
Fri, 12/01/2017 - 13:15
VE3CVG
VE3CVG's picture
I see that the frequencies
I see that the frequencies are down around 5.4GHz.
Support file attached. Any help appreciated.
Thanks.
Rick (VE3CVG)
 
Top
Fri, 12/01/2017 - 13:16
VE3CVG
VE3CVG's picture
I'll try again. Here is the
I'll try again. Here is the support file.
Support File Attachments: 
File supportdata-VA3RCB-NBrM5-101-201703020339.tgz
Top
Mon, 12/04/2017 - 22:40
(Reply to #8)
AE6XE
AE6XE's picture
VE3CVG,  our bad.  This
VE3CVG,  our bad.  This device is not correctly configured in the nightly build images. We should be able to correct this shortly, I just checked in a fix.

Joe AE6XE
Top
Tue, 12/05/2017 - 07:59
(Reply to #9)
VE3CVG
VE3CVG's picture
Thank you very much Joe!!!
Thank you very much Joe!!! Glad you were able to confirm it. Will I hear again, or what should my procedure be to correct my NBrM5? 73 Rick VE3CVG
 
Top
Tue, 12/05/2017 - 13:29
(Reply to #10)
AE6XE
AE6XE's picture
Rick,  Check back later today
Rick,  Check back later today for the nightly builds, there should be a new build posted with this fix, probably sometime after 4:30PM PDT.
Top
Tue, 12/05/2017 - 14:06
(Reply to #11)
KG6JEI
Nightly builds don't start
Nightly builds don't start building until after 0800 UTC, perhaps you meant sometime after 4:30 AM PDT ?
Top
Wed, 12/06/2017 - 09:13
(Reply to #12)
VE3CVG
VE3CVG's picture
Hi again Joe and everyone,
Hi again Joe and everyone,
On old NBrM5 (XM) number 1, that already had 3.16.1.1, and the 'New Hardware' banner, I loaded the 'system upgrade' (develop-171-69937359) from last night's build and all appears fine. I noticed that it has a distance slider.

On old NBrM5 (XM) number 2, that still had ubiquiti 6.04, I first downgraded to XM 5.5.11 then loaded the factory upgrade (develop-171-69937359) from last night's build. It did not automatically restart in the browser. After a manual start, It appears fine but does not have a distance slider. It uses a fill-in box.
Neither device displays the 'New Hardware' banner.
Thanks very much! I think we are good.
Rick (VE3CVG)
Top
Wed, 12/06/2017 - 10:45
(Reply to #13)
AE6XE
AE6XE's picture
Rick,  note, it is no longer
Rick,  note, it is no longer required, with the nightly build images, to downgrade AirOS.   This images will 'tftp' on top of any AirOS version the device was received  with (as of today).    The images can be uploaded in some AirOS versions in the UI--the newer versions block and require an image signature.   

Attempting to load 3.16.1.1 or prior AREDN images will require the AirOS downgrade proceedure to ensure there is a compatible bootloader on the device.

Joe AE6XE 
Top
Wed, 12/06/2017 - 09:32
VE3CVG
VE3CVG's picture
Slider became a box so now
Slider became a box so now they are identical.
Thanks
Rick (VE3CVG)
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer