You are here

Winlink over Mesh: Syncronization Issues

4 posts / 0 new
Last post
K1GGS
Winlink over Mesh: Syncronization Issues

I'm trying to set up my first Sync with another station.  We are able to connect to each other, but then it dies.

​When i connect to him i get this...

​Starting session for KG6WXC
Beginning session to send trasactions from K1GGS to KG6WXC
​Outgoing: Attempt to connect to KG6WXC at kg6wxc-wl2k.local.mesh:8780
Outgoig:  Connected to KG6WXC. waiting for login prompt.
outgoiing: timeout.  while waiting for read from KG6WXC
​Outgoing: Set final resultts to: Timeout while waiting for read from KG6WXC
Outgoing : Ending session with KG6WXC.  Transactions 
sent-0; Rejected-0; bytes sent-0
​Outgoing" closing connection to KG6WXC


When he connects to me:
​ Incoming:  Starting incoming connection session.  Connecting IP =10.96.124.129 ---
Incoming: Recieved valid logon from KG6WXC
Connecting IP 10.96.124.129
Disconnection occurred
​Main: End session. Id = 20974680

​Any Ideas?  There are messages waiting for Sync at my station.  KG6WXC is also trying to sync with a station in Santa Barbara, and is seeing the same errors at his end. 

Rusty K1GGS

KG6JEI
What is the packet loss rate
What is the packet loss rate between your stations?
w6bi
w6bi's picture
Winlink
Just to be clear, Rusty's talking about a Winlink over mesh issue.
K1GGS
Winlink/Mesh
We got it working.  It was a configuration issue at the far end.  We now have 3 RMS Relay stations up and synchronizing.  One in the Eastern part of the county, one on the ocean side (west) of the county and one in Santa Barbara County.  

Rusty K1GGS

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer