You are here

Another Newbie Question on Firmware Update

5 posts / 0 new
Last post
k6ghl
Another Newbie Question on Firmware Update
Sorry for another newbie question.  I have a nanostation M2 that is currently running 3.15.1.0.  I want to update to the most current firmware version 3.16.1.0.  When I try to upload the "sysupgrade" file it comes back with the following "Firmware CANNOT be updated the upload file is not recognized".  I thought that since I already had AREDN firmware 3.15.1.0 installed I needed to use the sysupgrade file.  Should I try to upload the "factory" file?  Just wanted to get some help before I try something else.  I'm  a little gun shy since I have a Bullet that I bricked by just charging ahead without knowing what I was doing.

Thanks,
Greg,
K6GHL
K5DLQ
K5DLQ's picture
Hi Greg,
Hi Greg,
What is the name of the firmware file that you are attempting to load to your Nanostation M2?

 
k6ghl
The file is:   AREDN-3.16.1.0
The file is:   AREDN-3.16.1.0-ubnt-nano-m-squashfs-sysupgrade-2.bin

Thanks,
Greg
K6GHL
K5DLQ
K5DLQ's picture
the filename cannot have the
the filename cannot have the trailing -2 on it.
It should be:   AREDN-3.16.1.0-ubnt-nano-m-squashfs-sysupgrade.bin
k6ghl
That was the problem.  Thanks
That was the problem.  Thanks for the help. 

Greg
K6GHL

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer