You are here

Home » Forums » General discussion

Another Newbie Question on Firmware Update

5 posts / 0 new
Log in or register to post comments
Last post
Fri, 10/14/2016 - 12:05
#1
k6ghl
Another Newbie Question on Firmware Update
Sorry for another newbie question.  I have a nanostation M2 that is currently running 3.15.1.0.  I want to update to the most current firmware version 3.16.1.0.  When I try to upload the "sysupgrade" file it comes back with the following "Firmware CANNOT be updated the upload file is not recognized".  I thought that since I already had AREDN firmware 3.15.1.0 installed I needed to use the sysupgrade file.  Should I try to upload the "factory" file?  Just wanted to get some help before I try something else.  I'm  a little gun shy since I have a Bullet that I bricked by just charging ahead without knowing what I was doing.

Thanks,
Greg,
K6GHL
Top
Fri, 10/14/2016 - 13:00
K5DLQ
K5DLQ's picture
Hi Greg,
Hi Greg,
What is the name of the firmware file that you are attempting to load to your Nanostation M2?

 
Top
Fri, 10/14/2016 - 17:04
(Reply to #2)
k6ghl
The file is:   AREDN-3.16.1.0
The file is:   AREDN-3.16.1.0-ubnt-nano-m-squashfs-sysupgrade-2.bin

Thanks,
Greg
K6GHL
Top
Fri, 10/14/2016 - 17:53
(Reply to #3)
K5DLQ
K5DLQ's picture
the filename cannot have the
the filename cannot have the trailing -2 on it.
It should be:   AREDN-3.16.1.0-ubnt-nano-m-squashfs-sysupgrade.bin
Top
Fri, 10/14/2016 - 18:33
(Reply to #4)
k6ghl
That was the problem.  Thanks
That was the problem.  Thanks for the help. 

Greg
K6GHL
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer