Hello
I am trying to install the nightly on my new alfa tube-ah POE.
I keep on getting
"invalid firmware image content"
Im using
aredn-babel-20251018-4b1eff98-ramips-mt76x8-alfa-network_tube-ahm-r0c-squashfs-sysupgrade.bin
one thing is that the firmware that the unit came with does not have (per the aredn documentation)
I am trying to install the nightly on my new alfa tube-ah POE.
I keep on getting
"invalid firmware image content"
Im using
aredn-babel-20251018-4b1eff98-ramips-mt76x8-alfa-network_tube-ahm-r0c-squashfs-sysupgrade.bin
one thing is that the firmware that the unit came with does not have (per the aredn documentation)
Navigate to System > Backup/Flash Firmware and go to Flash new firmware image
The only place i found was under the top right "admin", "system upgrade", and then it asks to drag the firmware you want to flash
The unit came like this from rockland
Model name: ALFA Network AHM27282U
Firmware Version: V1.3
Any thoughts?
Orv W6BI
My Alfa Tube AHM just arrived, what's the default password to get into the factory setup systems so I can flash?>
Thanks
Carl
Orv W6VBI
Couple of items:
1) Factory screen I get when starting up, is Morse Micro, with their logos "Mu". login is admin/admin
FYI, here's the factory information: Linus kernal 5.15.150. OpenWRT v23.05.3
I flashed the AREDN firmware, "...alfa-network_tube-ahm-r0c..."
Lights come on, I'm assigned IP address, router is 192.168.1.1, domain is "local.mesh" (Factory domain is 'lan')
Unable to access the AREDN config page at 192.168.1.1, or with localnode.local.mesh. Same behavior after flashing two Tubes.
I'm thinking the flash worked. DHCP is running. domain is changed from factory.
Attempt to connect with SSH, connection refused
Ideas?
Carl KO4SSA