You are here

Can't navigate using Tunnel

14 posts / 0 new
Last post
K7EOK
Can't navigate using Tunnel

Hello folks,
I had a working tunnel (client) on a hAP Lite.  Then all of a sudden it stopped working.  The tunnel still connects me to the tunnel server, the cloud icon shows I"m connected, and I can navigate and see services hosted on my immediate neighbor node.  A full mesh status page appears, either from my node or the one that is providing the tunnel to me.

However, all the links from there further don't work.  I can't look at any remote nodes, and cannot open any services on remote nodes.  These are all areas I could navigate to and use before.

The provider of the tunnel is very capable, and has others with working connections.  We can't figure out what's the issue.  Any ideas?

Ed  K7EOK
 

K7EOK
Hmmmm. 
Hmmmm. 
I can navigate to my current neighbor (the tunnel server) but not to any Remote Nodes.

Does anyone want to see the Support Data to troubleshoot, or is this not relevant?

Ed

 
k1ky
k1ky's picture
What versions? Equipment?
What version firmware and equipment involved? What changed?
K7EOK
2414-21115f7
firmware version:
model:
2414-21115f7
MikroTik RouterBOARD 952Ui-5ac2nD (hAP ac lite)


New tunnel as previous server went away.  Worked fine for a few days then symptoms as described above.  Several nightly builds applied for the heck of it didn't fix anything.  When I click a node or a service, a new window opens like it should, but nothing appears and the browser times out.

Ed

K7EOK
Well folks, it's fixed as of
Well folks, it's fixed as of now.  I'm waiting for the tunnel server provider to tell me what happened.  If I can I'll share back here.
Thanks,  Ed
 
K5CS
Can't navigate using tunnel - resolution?

Wonder what was found on the previous post about being unable to navigate across tunnel connections.

I have three MikroTik hAP lite routers, one is a tunnel server and two clients.  About a month ago I noticed I could not connect to the remote tunnel nodes even though I showed the tunnels active and VoIP and other traffic passes across with no problem.  All nodes are running the latest 3.22.12.0 firmware.  Today I downgraded the server node to firmware version 3.22.8.0 and everything works as expected. 

Is there a known bug in the 3.22.12.0 firmware?  I've searched this thread and noticed multiple people reporting this but I don't see any resolution.

-Charles, K5CS
 

nc8q
nc8q's picture
VoIP and other traffic passes across with no problem.
+1 K6CCC
Is 'other traffic' by IP or name?

73, Chuck

 
K6CCC
K6CCC's picture
By name or IP?
Were you trying to access by node name or IP address?  I don't remember what versions have been affected, but there are some recent versions that have seen issues with node names not propagating properly.
 
K5CS
VoIP and other traffic passes across with no problem
Thanks for the reply.  My problem is when I click on the node name links in the mesh status window.  I get a message that the node cannot be found. 

When I mention VoIP and other traffic passes across with no problem I am probably connecting via IP address.  An example, N1MM networking works fine and SIP traffic is OK also.  So I guess the problem is a node name issue.  I was unaware there was an issue with node name propagation.  I'll reinstall the latest firmware release & try connecting via IP address.  But in my opinion, node name is the way to go.

-Charles, K5CS


 
AB7PA
You may be experiencing this

You may be experiencing this issue which was fixed in mid-February and is available in the Nightly Build firmware.

K5CS
You may be experiencing this
Thanks for the updated info...Early to mid February is about the time I upgraded my hardware from Ubiquiti to MikroTik so I downloaded what was then the latest firmware, not knowing about the bug.  Been trying to troubleshoot since then.  Good to know the fix is in the nightly build.  I'll update the firmware tonight.
-K5CS


 
N5MXI
N5MXI's picture
I'm having the same issue

Hardware: MikroTik  hAP ac lite

On 3.23.8.0 I was able to navigate tunnels. After upgrading to a nightly update last week I was initially able to navigate tunnels and Cloud Mesh however I have lost this capability. I reverted back to 3.23.8.0 and still can't navigate tunnels. :( Data does seem to cross the tunnel fine.

David-N5MXI
HH# 5456 / HOIP# 100193

w6bi
w6bi's picture
Cloud Mesh
The changes needed for your localnode to become 'supernode-aware' are in the latest nightly build.  It's needed for proper behavior.   I suspect you have something else going on there.   There was some discussion of some route flapping going on in the supernodes which would impact your ability to get anywhere on the Cloud Mesh.  There's been a patch issued for that but it won't appear until the next nightly build (sometime in December probably).

Orv W6BI
 
nc8q
nc8q's picture
reverted back to 3.23.8.0 and still can't navigate tunnels.
Hi, David:

If "reverted back to 3.23.8.0 and still can't navigate tunnels",
Then perhaps the problem exists at the other end of your tunnel.

73, Chuck

 

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer