You are here

CPE210: no mesh on channel -4

2 posts / 0 new
Last post
CPE210: no mesh on channel -4

I have two RB952 that mesh perfectly on Channel -4 (2387) 5MHz. Now I got a CPE210. When I configure it identically to the RB952, no nodes will appear in the Mesh. When I configure both devices to Channel 1 with 20MHz bandwidth, it works.
Is there a limitation in the CPE210 device implementation? Or a Bug?
I have: Current Version:      Hardware Type: (ath79/generic) (cpe210-v3)
Thanks in advance.
73 Christian  DB9CR

This is a known hardware issue

Yes, this is a known hardware issue:
Use 10 MHz channel width to link these devices.

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer