You are here

New hopeful

2 posts / 0 new
Last post
KJ7CLT
New hopeful

I am just moving into Albuquerque from Seattle. I am looking into connecting and I have unsuccessfully tried to flash GL-iNet GL-AR750S-EXT. I used the GL-AR750 sysupgrade but it only ends up continuously rebooting and I can't get a stable IP from it. I was able to reload GL firmware and backup, so it didn't fully brick. Is the GL-750 not compatible?
https://www.gl-inet.com/products/gl-ar750s/ is what I have.
https://www.gl-inet.com/products/gl-ar750/ is the generic. 

I wanted the external antennas as I placed SMA connectors in place of the tiny swivels on each side. Attached Picture

The only difference I see is PoE option which I have a switch on my rack to host PoE.

Thank you, 
KJ7CLT

File Attachment: 
nc8q
nc8q's picture
Is the GL-750 not compatible?
Dear KJ7CLT:

You did not mention which binary you were loading.

You seem to have the gl-ar-750-Slate.
The gl-ar-750-Creta is supported on current stable, 3.22.12.0.

There are 2 sysupgrade binaries in today's Nightly Build for the Slate.

GL-iNET devices can be loaded with a sysupgrade because they already have OpenWRT on them.
;-)

73, Chuck


 

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer