You are here

AC Equipment

9 posts / 0 new
Last post
W7BJH
AC Equipment
Any chance there is some firmware under development for the AC 2.4 and 5 GHz Ubiquiti equipment?  I've got an NBE-5AC-16 on-hand that I'd like to put to work and there is actually some AC gear in stock.

Cheers, 

BJ - W7BJH
KK4ZUZ
Have a look at the latest
Have a look at the latest nightly builds to see what AC devices are now supported.
W7BJH
I appreciate the lead.  I
I appreciate the lead.  I looked and I do see a NanoBeam 5 AC listed, I loaded the ...factory.bin and then the ...sysupgrade.bin and got the web-GUI to load, but there is a banner at the top that says UNSUPPORTED DEVICE and when I try to save the basic setup information it posts a page that says; "BAD GATEWAY, The process did not produce any response."

Model is NBE-5AC-16 - - maybe its a non-compatible version.

If anyone has any advice I'm all ears.  Thanks!

 
KK4ZUZ
Try uploading the support
Try uploading the support data so the devs can have a look at it.
W7BJH
I'm not sure where to find
I'm not sure where to find that.  Is it on the device itself?
 
nc8q
nc8q's picture
Download Support Data button is found here:

http://localnode.local.mesh/cgi-bin/admin

at the bottom of the page.

Navigate to the 'Administration' page.

73, Chuck
 

N7JYS
UBNT-Rocket_5AC_lite
After downloading nightly build  aredn-2096-fce9629-ath79-generic-ubnt_rocket-5ac-lite-squashfs-factory, my new rocket R5ac-lite gave me a TFTP:2: Firmware check failed. Is there somthing im missing?

Eric
w6bi
w6bi's picture
Ubiquiti ac device procedure
Eric, the installation procedure has changed substantially for Ubiquiti AC devices.  It doesn't use TFTP anymore. Check the latest AREDN docs for the new procedure.

Orv W6BI
 
N7JYS
Ubiquiti ac device procedure
Thanks Orv for the heads up on the new procedures will check it out. :)

Eric 
N7JYS

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer