You are here

Mesh service PI distro

7 posts / 0 new
Last post
KG4FJC
KG4FJC's picture
Mesh service PI distro
I noticed ONE other post from several years ago on this subject so I thought I might be able to bring the idea back to the front....Has anyone done a custom PI OS for mesh?
It would be very nice for simplicity and to help with getting everyone on the same page to have a custom flavor for a PI pre built for doing the services. I'm thinking that one MAIN distro would make emcom life much better. Building out a custom distro is beyond my brain to do. I was thinking, like the other thred had mentioned, a build preloaded with core mesh services.....
Chat
PBX
citadel
video conference
ETC...
Jason Gnatowsky
KG4FJC
 
KF7BWS
KF7BWS's picture
Mesh service PI distro

On the Supported Platform Matrix list toward the bottom is the USB150. The USB150 is a USB dongle that can be flashed with the AREDN software and plugged into the Raspberry Pi to put the Pi on the AREDN network. There is no reason for a distribution with OLSR bound to the TCP/IP protocol in the Pi. Some one some time could make a TCP/IP plugin for the Pi but I have been told that it is not in the plans for implementing because of the access to the USB150

K5DLQ
K5DLQ's picture
Exactly!
Exactly!
ke6bxt
ke6bxt's picture
Raspberry Pi distro for AREDN mesh SERVICES
The original post is requesting a PI distro for generating an SD/Mini SD software load for the PI that would have common SERVICES that would be available through the connected AREDN mesh node.

It is NOT asking for a PI distro that would make the PI a mesh node.
It is also NOT asking for mesh services (such as a PBX, Web server, Mapper program, File server, etc) to be added to the firmware load that runs on an AREDN mesh node.

This is probably NOT a task for the AREDN development team but for one or more of the Raspberry Pi experts out there that can look at the mesh SERVICES that run on a Pi and bundle them so you don't need a separate Pi for each SERVICE that you want to run.  A Pi stack with three Pis may look cool, each one plugged into a separate port on your hAP but if you can do the same thing with one Pi I think that would be preferable.
 
N0YWB
N0YWB's picture
ke6bxt's picture Raspberry Pi distro for AREDN mesh SERVICES
Agree with ke6bxt comment.
Something like the Build-a-Pi script, but only with AREDN services to choose from.
Just supply with callsign and credentials, and the apps get built, ready to rock!
https://github.com/km4ack/pi-build 
 
KG4FJC
KG4FJC's picture
EXACTLY!I was thinking....

EXACTLY!I was thinking.....smoke signals.....A common build for a pi that could host the services listed on the node.


The GITHUB address didn't come up....404

ko0ooo
try this
try this link...

Richard    ko0ooo

https://github.com/km4ack/pi-build

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer