You are here

Identifying XM vs XW... after reflash

12 posts / 0 new
Last post
N8NQH
N8NQH's picture
Identifying XM vs XW... after reflash
Is there a way -without disassembling an AREDN reflashed  Ubiquiti node-  to determine what hardware version is inside (XM or XW)?

I ran into an instance where an existing  Aredn NanoStation M5 node was going to be DTD'd to another node.  I was trying to determine if the Secondary Port (XW) is what I was needing to connect to, or not (XM).   I looked in the AREDN setup screens and couldn't find any "hint" of what hardware circuit board was inside.

With the Ubiquiti  factory flash, the setup screen for node info shows "XM" or "XW"... but I couldn't locate any such identifier in the AREDN flash screens.

If it is there, point me in the right direction.
KG6JEI
I don't have an XW device in
I don't have an XW device in front of me but I'm pretty sure it will show on the sysinfo page

http://localnode:8080:cgi-bin/sysinfo
K5DLQ
K5DLQ's picture
or http://localnode:8080/cgi
k1ky
k1ky's picture
Name your Node to include Board Version if "XW"
I have adopted a naming standard to include the board revision if a unit has an "XW" board.  Example: K1KY-NSM5XW-101, K1KY-RKM5XW-202,... etc.
I also now track the board revision in my equipment tracking spreadsheet no matter whether it is XM, XW or whatever. Makes MESH life much easier as we move on along.... T.D.
k3la
Resolution
Was there ever a resolution to this question? I have an Airgrid that I want to upgrade but I do not know whether it is xm or xw. Barney K3LA
K6CCC
K6CCC's picture
Go to the Admin page
Easy.  Go to the Administration page and look at the section where you would go for a firmware update.  It will tell you the current version of firmware, AND the hardware type.  The example below is a XM.  If It's a XW it will specify XW. Firmware Update
current version: 353-79a57a0
hardware type: (ath79/generic) ubnt (rocket-m)
k3la
Different screen
When I go to that screen it shows firmware version 3.16.1.0 but no reference to hardware. I compared to a node with the newest version and it shows the hardware but the earlier version does not. Barney k3la
K6CCC
K6CCC's picture
Foul!

See next post of mine...
I'm calling foul on that statement.  You will see that every single one shows the hardware type:

K6CCC
K6CCC's picture
Well maybe not...
I just realized that you are showing an ANCIENT firmware version, so maybe it didn't show the hardware version that long ago.  However it it's that old, it's almost certainly XM.
 
k3la
That is correct

That was going to be my assumption but thought I would ask the experts. See screenshot below. It had been used several years ago but put away. Another node that I have of a different type with current software shows more information as you expected. Would loading the xm firmware cause I problem if I am wrong?  Thanks for your comments. Time to get to sleep. 73 Barney

Image Attachments: 
K6CCC
K6CCC's picture
No.  It's simply won't load.
No.  It's simply won't load.
 
w6bi
w6bi's picture
The secret
AFAIK, for any flavor of hardware, if you go to http://<hostname>/cgi-bin/sysinfo, you can ascertain the version of the hardware.

Orv W6BI

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer