You are here

Home » Forums » Hardware

TP Link CPE210

7 posts / 0 new
Log in or register to post comments
Last post
Tue, 03/17/2020 - 07:55
#1
K4TTZ
TP Link CPE210

Can't find an AREDN firmware that will load into aTP Link CPE210 v2.8 hardware with internal v2.2 firmware.

Any thoughts would be appreciated.

Wayne
K4TTZ

Top
Wed, 04/15/2020 - 19:12
N3XKD
K4TTZ, Did you ever get this
K4TTZ, Did you ever get this figured out ? I just picked up one of these and it seems to be the same version as what you have, the v2.8 hardware. I'm going to take a run at it and see if it'll boot with the v2 firmware.
Top
Wed, 04/15/2020 - 21:37
(Reply to #2)
KK4ZUZ
Enable SSH on the device and

Enable SSH on the device and connect to it with SSH
Please provide the output from
cat /dev/mtdblock2 | grep CPE210
Additionally provide the output from
dmesg
 

Top
Wed, 04/15/2020 - 22:27
(Reply to #3)
N3XKD
Here's the mtd info, and I

Here's the mtd info, and I have attached the dmesg

$ cat /dev/mtdblock2 | grep CPE210
CPE210(TP-LINK|US|N300-2|55530000):2.0


I tried to load the CPE210 V2 Latest Stable, and that seems to work I have not tested it with an RF peer yet. But it hands out DHCP ok. Looks good so far.
 

File Attachment: 
Plain text icon CPE210v2.8-dmesg.txt
Top
Thu, 04/16/2020 - 08:00
(Reply to #4)
KK4ZUZ
Based on the information

Based on the information provided I see no reason why it will not work as long as you do not load an older version of the software on the device.
Stick to the latest Stable Release or the Latest Nightly Builds.

Top
Thu, 04/16/2020 - 09:36
AE6XE
AE6XE's picture
cpe210 v2.8 reported working
See this forum post:

https://www.arednmesh.org/comment/14852#comment-14852

Joe AE6XE
Top
Thu, 04/16/2020 - 12:49
(Reply to #6)
N3XKD
Thanks Joe
Thanks Joe
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer