After I upgraded from 1190-1272c57 to 1234-dcdd217, I now get the "!!!! UNTESTED HARDWARE !!!!" yellow banner. Did it go back to being considered untested hardware or was that just something accidently introduced in the new nightly? The node has been working fine for many months and still does with this 1234 build.
Thanks, Mike ab4yy
You are here
TP-Link CPE210 (v2)
Sun, 02/09/2020 - 08:26
#1
TP-Link CPE210 (v2)
Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer
Joe AE6XE
I made a mistake in stating the problem (too many versions on on my PC).
I am running the latest (1307-5244948) and that is what is loaded and has the untested message.
Thanks, Mike
I never looked at that field until I read your post and sure enough I do not see the -1 & -2 channels either. I had no reason to look as the node with that version (1326...) otherwise seems to work fine on lur channel -2 network. It looks like a bug but I'm not going to mess with it until a fix comes out. :)
You and I are seeing the same results.
- Mike ab4yy
Edited with correct string :).
This is a simple change to get working. it's in the pipeline... If you want to manually edit a file to get it to work on the node, from command line on the node, "vi /www/cgi-bin/perlfunc.pm", and find and change this line (requires some knowledge of using 'vi'):
from: "'TP-Link CPE210 v2.0' => {"
to: "'TP-LINK CPE210 v2' => {"
Upstream Openwrt changed the string for the model.
Joe AE6XE
Thanks Joe. The edit (exactly per your instructions) fixes it.
- Mike ab4yy