You are here

Home » Forums » Hardware » Nodes

GL-iNET AR 150 ports - post AREDN migration

5 posts / 0 new
Log in or register to post comments
Last post
Sun, 07/07/2019 - 18:51
#1
K1DOS
GL-iNET AR 150 ports - post AREDN migration
I have recently migrated four GL-iNET AR 150 units to AREDN.  Can anyone advise on the following:

What does the WAN port become (LAN, WAN, other)?
Does the switch retain any functionality?  If so, what is function?

Thank you in advance.

Respectfully,

Hank
 
Top
Sun, 07/07/2019 - 22:40
AB7PA
AR150 port info
There's some info on the Ethernet ports for GL iNet AR150 here.  Hope this helps.  73
https://github.com/aredn/aredn_ar71xx#ethernet-port-usage
Top
Mon, 11/25/2019 - 03:50
(Reply to #2)
EA5HJX
Regarding the port
Regarding the port configuration on the GL iNET AR150

there is any option to change the WAN port on the GL iNET AR150 to become to LAN?

As a part of my deployment maybe very usefull to conect on the LAN port a VoIP telephone and on the WAN port a laptop. I'm deploying a gobox suitcase with a telephone and a RJ45 to connect the laptop. Please see picture attached
 
Image Attachments: 
Top
Mon, 11/25/2019 - 20:54
(Reply to #3)
AE6XE
AE6XE's picture
In firmware/software anything
In firmware/software anything is possible.  However, the setup options in the AREDN UI do not currently have the capability to re-assign the port designations.  With know-how, one could hack the config files to do this, but then would not be able to use the AREDN UI to change further settings (would over-write any custom config settings).    A couple of options:

A) use an hAP ac lite with 3-LAN ports
B) add an external (dumb) switch to extend the LAN ports

Joe AE6XE
Top
Mon, 07/08/2019 - 12:47
K1DOS
Thank you.  That link was
Thank you.  That link was what I needed.
Top

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer