Hello everyone,
I have just taken over the AREDN project an initiative close to my heart to ensure the network runs smoothly in our region.
I need to install a dozen nodes on mountaintops. However, with a MikroTik AC3 router,
the reboot process proceeds normally up to a certain point: all the LEDs light up, and then the device stops responding.
I have to cut the power, wait about 5 seconds, and plug it back in; it then works perfectly until the next reboot.
I need to install a dozen nodes on mountaintops. However, with a MikroTik AC3 router,
the reboot process proceeds normally up to a certain point: all the LEDs light up, and then the device stops responding.
I have to cut the power, wait about 5 seconds, and plug it back in; it then works perfectly until the next reboot.
Do you have a solution to save me from having to climb to the top of this mountain to unplug and replug the power cable, just to restore normal operation?
The other routers on the other mountains reboot automatically.
Thank you for your help in finding a solution.
Have a good day.
Luc
VE2LUQ
Luc
VE2LUQ