You are here

Hinovision POE-SW504GD switch questions

4 posts / 0 new
Last post
HB9XCL
Hinovision POE-SW504GD switch questions
Hi,
I have two questions, which are somehow related...

1. Anyone uses following device:
(POE-SW504GD) 4 Ports Mini Solar PoE Switch Optimized for Big PTZ Came | Hinovision Solutions LLC (Linovision USA)
It offers one 24V passive POE port and two 48V POE ports i.e. for telephones, and can be powered from 9 to 57V. There are models with more than two 48V ports available, too. I find them very interesting.

2. the related question ;-)
Let's say I have two antennas, like Ubiquiti Nanobeams, connected to to the 24V POE port of the above mentioned switch, talking DtD, and two phones connected to the 48V POE ports. Would I have to worry about the fact that I cannot manage the switch in terms of VLAN tagging? or, after the change from OLSR to Babel, is that problem solved?

Thanks guys!
73s Kurt HB9XCL


 
KD1HA
KD1HA's picture
Kurt, If you do try the above
Kurt, If you do try the above please let, me/us know how well it worked! 
Thank you
Denis KD1HA
HB9XCL
Hi Denis
Hi Denis
I just ordered two of them. I like the Idea of just having a small battery, like a 14.4V screwdriver lithium battery, powering this little thingy and directly get the 24V and 48V POE for an antenna and a phone out of it. Sounds like a perfect go-box device. Just too bad they are not managed (no VLAN settings possible), but as long as there's only one antenna connected, no problem :-) I will test them and let you know if they are any good for their money.
73s de Kurt HB9XCL
KD1HA
KD1HA's picture
If you connect it to a VLAN2
If you connect it to a VLAN2 You may get it to act as a VLAN2 like a dumb switch...maybe? I think I will order one! 
Thanks Kurt,
Denis KD1HA
 

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer