AREDN highly recommends upgrading to AREDN security release v3.22.6.0
For more information see the Latest Docs page
Alerts
News
AREDN at Hamvention 2019
It is finally here! We are looking forward to seeing you at Hamvention in Xenia, Ohio this Friday through Sunday, May 17-19.
We are in booth #1001. We will have a lot of equipment on display, including some of the newest gear from Mikrotik and our fourth supported manufacturer GL-iNet.
In addition to the new hardware, we have made a lot of improvements in the firmware. We want to hear your comments and questions on the recent changes. As always, your ideas help us set the direction for future enhancements.
We will hold some short classes on a variety of topics to help get you started or to extend your capabilities.
Stop by our booth and say hello.
Updated date: Sunday, May 12, 2019 - 11:59
Hamvention® 2019 Theme Promotes Mentoring the Next Generation
Hamvention, the largest annual Amateur Radio gathering in the U.S. and the ARRL National Convention will share a joint theme, “Mentoring the Next Generation” of Amateur Radio operators.
Hamvention will host the 2019 ARRL National Convention in Xenia, Ohio, May 17-19, 2019. The joint announcement was made Nov.1 by Jack Gerbs, WB8SCT, Hamvention General Chairman; Rick Allnutt, WS8G, Assistant General Chairman and Bob Inderbitzen, NQ1R, ARRL Marketing Manager. The location is the Greene County Fairgrounds on May 17 – 19 in Xenia, Ohio.
The AREDN® team and the Miami Valley Mesh Alliance will again be in booth #1001. The team is working ardently to mentor hams about the 21st century applications of mesh networking. We will have a lot of new devices, new firmware enhancements and new ideas to show you. We will again run mini-classes throughout the day to tell you about how to get started and how to use AREDN mesh networking.
For more information see the Hamvention website and the ARRL website.
Look for the AREDN team and the Miami Valley Mesh Alliance when you are there. We look forward to meeting you.
Updated date: Saturday, April 6, 2019 - 11:48
AREDN Release Notes v3.19.3.0 – 23 March 2019
The AREDN team is pleased to announce the general availability of the latest stable release of AREDN firmware.
Since our last stable release just 6 months ago, the AREDN team has made significant progress. We now fully support 55 devices from three manufacturers, and support an additional 4 devices with some cautions. This diversity of supported equipment enables hams to choose the right gear for a given situation and budget.
Our documentation has been vastly improved. If you haven't seen it recently, please look at the --ONLINE DOCS -- link under the Docs tab on the Main Menu bar. Our documentation is available to download as a PDF so that you can read it offline at your convenience.
- AREDN firmware is now based on the most recent stable version of OpenWRT 18.06.2 released in January 2019. This includes a current version of the Linux kernel. This improvement is significant in that it enables AREDN firmware to benefit from the many bug fixes, security improvements and feature enhancements provided by developers around the world.
- Current AREDN nightly builds can be loaded onto any supported (or ‘in testing’) Ubiquiti device by using the TFTP method. If the version of AirOS is v5.5 or lower, then the AirOS Web Interface may be used to load AREDN. The bootloader provided with AirOS 5.6 and higher will check for official “signed Ubiquiti firmware”...
Updated date: Saturday, March 23, 2019 - 13:08
AREDN Release Notes v3.18.9.0 – 26 September 2018
The AREDN team is pleased to announce the general availability of the latest stable release of AREDN firmware.
This release includes many significant improvements in the underlying OpenWRT code during the last 4 years, from July 2014 to August 2018. It also introduces a major upgrade in OLSR from version 0.6.7 to version 0.9.6.2.
Details of the OpenWRT changes are found at the following links:
OpenWRT 18.6.0 – First Stable Release – July 2018
OpenWRT 18.06.1 Service Release
OpenWRT Version History
List of Changes
-
AREDN firmware is now based on the most recent stable version of OpenWRT 18.06.1 released in August 2018. This includes a current version of the Linux kernel. This improvement is significant in that it enables AREDN firmware to benefit from the many bug fixes, security improvements and feature enhancements provided by developers around the world.
-
Current AREDN software can be loaded onto any supported (or ‘in testing’) Ubiquiti device by using the TFTP method. If the version of AirOS is v5.5 or lower, then the AirOS Web Interface may be used to load AREDN. The...
Updated date: Saturday, October 13, 2018 - 10:10
Pages
Announcements
Hurricane Season Approaches
It is US National Hurricane Preparedness Week! Are you prepared for this year’s hurricane season? Are you ready to assist others by providing high-speed communications when the commercial facilities are not available?
As a 2019 Call for Code Program Supporter, the AREDN team asks you to watch how Call for Code 2018 winner Project Owl piloted their mesh network solution to help communities in Puerto Rico https://ibm.co/2UUv1Ge
We plan to host a discussion on deploying an AREDN mesh network in Puerto Rico during Hamvention in our booth #1001. Please join us and contribute your ideas.
There is another way to help in creating a cleaner, safer and healthier environment for the worst hit communities and a chance to win $200,000 USD. Enter the 2019 Call for Code challenge https://ibm.co/2DINsrC
AREDN Supports Call for Code 2019
Do you want to help improve disaster communications?
Do you want to use your AREDN network as a foundation for solutions to improve disaster relief efforts?
Do you develop computer applications and want to help improve disaster communications? AREDN asks you to make a difference with your code.
AREDN is a 2019 Call for Code Program Supporter. Join Call for Code in building solutions to improve disaster relief efforts and a chance to win $200,000
This year's Call for Code program decided to add an emphasis on healthcare needs in the lead up to and aftermath of natural disasters. The program's Chief Technology Officer (CTO) Daniel Krook writes "Specifically, we’re calling on developers to create solutions that address the following aspects of healthcare:
- Food and water safety
- Medical supply distribution
- Tracking and halting disease epidemics
- Access to medical health records
- Mental health
- Serving vulnerable populations
We based our healthcare...
Read More- ‹ previous
- 7 of 35
- next ›
Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer