Setting up a new hAP lite that will eventually be moved to a remote spot that will be used to tunnel into my home hAP Lite. Let's call my home one "A" and the new one to eventually be remoted "B"
Both are running FW 3.21.4.0 and hAP A is tunneled to a different remote location. That tunnel has worked fine for months. The WAN connection on hAP A is obviously is connected to a LAN port on my internet router and is assigned an IP of 192.168.1.67 (I reserved the IP on my internet router)
For testing and setup purposes, I connected hAP B to a different LAN port on my internet router. No problem with obtaining an IP, etc (assigned 192.168.1.75). So, I set hAP A as a tunnel server using its IP of 192.168.1.67 as the Tunnel DNS Name. I set hAP B as a client, using 192.168.1.67 as the "Tunnel DNS Name". Used the same Tunnel Network IP (172.31.xxx.xxx) on both A and B and they both show ACTIVE.
When I try to do a Mesh Status from B, I receive the error message in the thread title.
What am I doing wrong?
Both are running FW 3.21.4.0 and hAP A is tunneled to a different remote location. That tunnel has worked fine for months. The WAN connection on hAP A is obviously is connected to a LAN port on my internet router and is assigned an IP of 192.168.1.67 (I reserved the IP on my internet router)
For testing and setup purposes, I connected hAP B to a different LAN port on my internet router. No problem with obtaining an IP, etc (assigned 192.168.1.75). So, I set hAP A as a tunnel server using its IP of 192.168.1.67 as the Tunnel DNS Name. I set hAP B as a client, using 192.168.1.67 as the "Tunnel DNS Name". Used the same Tunnel Network IP (172.31.xxx.xxx) on both A and B and they both show ACTIVE.
When I try to do a Mesh Status from B, I receive the error message in the thread title.
What am I doing wrong?