You are here

Untested Hardware for LiteBeam M5

2 posts / 0 new
Last post
K6MEC
K6MEC's picture
Untested Hardware for LiteBeam M5

Hey, all.

I'm getting Untested Hardware on my LiteBeam M5.
It was recommended on Facebook that I supply the information here.
So far I've been unable to get my LiteBeam M5 and NanoStation M5 to connect.
So, here it is:

 node: K6MEC-NODE1
model: Unknown Hardware 

!!!! UNSUPPORTED DEVICE !!!!
boardid: Ubiquiti Litebeam M5
Device has not been tested. Please file a ticket with your experiences.

br-lan F0:9F:C2:B7:06:58
eth0   F0:9F:C2:B7:06:58
eth0.1 F0:9F:C2:B7:06:58
eth0.2 F0:9F:C2:B7:06:58
tunl0  00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
wlan0  F0:9F:C2:B6:06:58
wlan0-1 F2-9F-C2-B6-06-58-00-00-00-00-00-00-00-00-00-00

/proc/cpuinfo
system type        : Atheros AR9342 rev 2
machine            : Ubiquiti Litebeam M5
processor        : 0
cpu model        : MIPS 74Kc V4.12
BogoMIPS        : 266.64
wait instruction    : yes
microsecond timers    : yes
tlb_entries        : 32
extra interrupt vector    : yes
hardware watchpoint    : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
isa            : mips1 mips2 mips32r1 mips32r2
ASEs implemented    : mips16 dsp dsp2
shadow register sets    : 1
kscratch registers    : 0
package            : 0
core            : 0
VCED exceptions        : not available
VCEI exceptions        : not available


nvram
hsmmmesh.settings=settings
hsmmmesh.settings.wifimac='f0:9f:c2:b6:06:58'
hsmmmesh.settings.mac2='182.6.88'
hsmmmesh.settings.dtdmac='183.6.88'
hsmmmesh.settings.node='K6MEC-NODE1'
hsmmmesh.settings.config='mesh'
K5DLQ
K5DLQ's picture
The UBNT LiteBeam M5 is

The UBNT LiteBeam M5 is supported.  this may be a slightly different model/variation.  Can you attach a supportdata file from the admin page of your node?

 

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer