Team,
I'm using the Alfa Tube AHM.
1) Factory screen I get when starting up, is Morse Micro, with their logos "Mu". login is admin/admin
Some people have reported a different screen, and login with root/(blank)
FYI, here's the factory information: Linus kernal 5.15.150. OpenWRT v23.05.3
2) I flashed the AREDN firmware, "...alfa-network_tube-ahm-r0c..."
Lights come on, I'm assigned IP address, router is 192.168.1.1, domain is "local.mesh" (Factory domain is 'lan')
Unable to access the AREDN config page at 192.168.1.1, or with localnode.local.mesh. Same behavior after flashing two Tubes.
I'm thinking the flash worked. DHCP is running. domain is changed from factory setting.
Attempt to connect with SSH, connection 'refused'
Edit: ssh -p 2222 root@192.168.1.1 successfully connected and asked for password.
1) what is default password (blank didn't work). Note, the node has not been initially AREDN configured with node name and password.
2) once in with SSH, I have no idea what to do to debug.
Ideas?
Carl KO4SSA
I'm using the Alfa Tube AHM.
1) Factory screen I get when starting up, is Morse Micro, with their logos "Mu". login is admin/admin
FYI, here's the factory information: Linus kernal 5.15.150. OpenWRT v23.05.3
2) I flashed the AREDN firmware, "...alfa-network_tube-ahm-r0c..."
Lights come on, I'm assigned IP address, router is 192.168.1.1, domain is "local.mesh" (Factory domain is 'lan')
Unable to access the AREDN config page at 192.168.1.1, or with localnode.local.mesh. Same behavior after flashing two Tubes.
I'm thinking the flash worked. DHCP is running. domain is changed from factory setting.
Attempt to connect with SSH, connection 'refused'
Edit: ssh -p 2222 root@192.168.1.1 successfully connected and asked for password.
1) what is default password (blank didn't work). Note, the node has not been initially AREDN configured with node name and password.
2) once in with SSH, I have no idea what to do to debug.
Ideas?
Carl KO4SSA