You are here

RB912UAG-5HPnD - mini pcie card.

5 posts / 0 new
Last post
kc7dmf
RB912UAG-5HPnD - mini pcie card.

Hello,
Does anyone know if the add on mini pcie card is supported with AREDN firmware?
If it is can you do simultaneous 2.3Ghz and 5.8Ghz, or is it just one at a time. 

Mikrotik R11E-2HPND Internal RF Wireless Networking Card
https://www.amazon.com/Mikrotik-4-MikroTik-R11e-2HPnD/dp/B00I4QFCU0/ref=...


73
Mark
KC7DMF

nc8q
nc8q's picture
is _ supported with AREDN firmware?

The AREDN firmware is based on OpenWrt with additional packages and patches.
A Makefile automates the entire process to create firmware images.
https://github.com/aredn/aredn

My impressions:


I hope this helps,
Chuck

K5DLQ
K5DLQ's picture
currently, the firmware only

currently, the firmware only supports one mesh interface, but, we are working on supporting 2.
 

kc7dmf
That would be good. 

That would be good. 

Hopefully more hardware (the newer ubiquit radios etc) will gain support at some point. 


Thanks...

 

KM6SLF
KM6SLF's picture
A second mesh interface, for

A second mesh interface, for some devices, would be fantastic. Another feature that might be valuable, especially for testing, but also for reducing data usage on metered connections, would be allowing users to set the link cost value in the settings or advanced settings section. Do you see any value in a feature like that?

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer