You are here

Nano Loco upgrade from develop-172-69937359

4 posts / 0 new
Last post
K5YX
K5YX's picture
Nano Loco upgrade from develop-172-69937359

We have a Loco M2 that currently has firmware  develop-172-69937359.  Can this be directly upgraded to the latest sysupgrade firmware for the Loco M2 XW?

k1ky
k1ky's picture
Nano Loco upgrade from develop-172-69937359

I have found that it is best to "walk" them up a few steps - at least to the next production release, (after dev-172) and then on to the latest production or nightly.  Especially when coming from pre- 3.16 versions. 3.16.2 I believe is a good stepping stone from the early stuff. 

k1ky
k1ky's picture
Upgrade

And just to be clear, be sure to match the board revision level XM->XM or XW->XW when loading AREDN Firmware.  Don't mix them or you will brick the unit.
One good way to tell XM models usually have less than 15M of /temp and 6M of /m   XW usually have 30M+ /t and /m (with the exception of Rocket Models, which have about the same memory in their XM and XW models upwards of 30-33t and around 34-36M)
 

K5YX
K5YX's picture
free /m and free /t both show

free /m and free /t both show total  of 61064

Theme by Danetsoft and Danang Probo Sayekti inspired by Maksimer